Powder flux regulation in the Laser Material Deposition Process

被引：2
|
作者：
Arrizubieta, Jon Inaki [1 ]
Wegener, Maximiliam [2 ]
Arntz, Kristian [2 ]
Lamikiz, Aitzol [3 ]
Ruiz, Jose Exequiel [3 ]
机构：
[1] Univ Basque Country UPV EHU, Donostia San Sebastian, Gipuzkoa, Spain
[2] Fraunhofer Inst Prod Technol IPT, Aachen, Germany
[3] Univ Basque Country UPV EHU, Donostia San Sebastian, Gipuzkoa, Spain
来源：
LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016 | 2016年 / 83卷
关键词：
Laser; powder flux; regulation; solenoid valves; METAL-DEPOSITION; PARAMETERS; GEOMETRY;
D O I：
10.1016/j.phpro.2016.08.076
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present research work a powder flux regulation system has been designed, developed and validated with the aim of improving the Laser Material Deposition (LMD) process. In this process, the amount of deposited material per substrate surface unit area depends on the real feed rate of the nozzle. Therefore, a regulation system based on a solenoid valve has been installed at the nozzle entrance in order to control the powder flux. The powder flux control has been performed based on the machine real feed rate, which is compared with the programmed feed rate. An instantaneous velocity error is calculated and the powder flow is controlled as a function of this variation using Pulse Width Modulation (PWM) signals. Thereby, in zones where the Laser Material Deposition machine reduces the feed rate due to a trajectory change, powder accumulation can be avoided and the generated dads would present a homogeneous shape. (C) 2016 The Authors. Published by Elsevier B.V.
引用
收藏
页码：743 / 751
页数：9
相关论文
共 50 条
  • [21] y Numerical approach for the estimation of the deposited material on the laser material deposition process
    Lamikiz, A.
    Arrizubieta, J., I
    Ukar, E.
    Martinez, S.
    Ruiz, J. E.
    Cortina, M.
    10TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES [LANE 2018], 2018, 74 : 785 - 789
  • [22] Theoretical analysis of the coincident wire-powder laser deposition process
    Pinkerton, Andrew J.
    Syed, Waheed Ul Haq
    Li, Lin
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2007, 129 (06): : 1019 - 1027
  • [23] Adaptive modeling of laser powder deposition process for control and monitoring application
    Durali, Mohammad
    Fathi, Alireza
    Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Vol 1, Pts A-C, 2005, : 755 - 760
  • [24] Process characterization of powder based laser metal deposition on thin substrates
    Guepner, Michael
    Rietzke, Sebastian
    Paetzold, Robert
    Bliedtner, Jens
    Bergman, Jean Pierre
    JOURNAL OF LASER APPLICATIONS, 2018, 30 (03)
  • [25] Adaptive modeling of laser powder deposition process for control and monitoring application
    Durali, Mohammad
    Fathi, Alireza
    Khajepour, Amir
    Toyserkani, Ehsan
    JOURNAL OF VIBRATION AND CONTROL, 2007, 13 (05) : 461 - 473
  • [26] Diagnostics of powder particle parameters under laser radiation in direct material deposition
    Sergachev, D. V.
    Kovalev, O. B.
    Grachev, G. N.
    Smirnov, A. L.
    Pinaev, P. A.
    OPTICS AND LASER TECHNOLOGY, 2020, 121
  • [27] Optimization of selective powder deposition for multi-material powder bed fusion: process innovations and applications
    Girnth, Simon
    Wacker, Christian
    Waldt, Nils
    Klawitter, Guenter
    Droeder, Klaus
    PROGRESS IN ADDITIVE MANUFACTURING, 2024,
  • [28] Influence of Process Parameters and Deposition Strategy on Laser Metal Deposition of 316L Powder
    Mazzucato, Federico
    Aversa, Alberta
    Doglione, Roberto
    Biamino, Sara
    Valente, Anna
    Lombardi, Mariangela
    METALS, 2019, 9 (11)
  • [29] Influence of process strategy on distortion and residual stresses for the powder based laser metal deposition process
    Pirch, N.
    Schleifenbaum, H.
    Linnenbrink, S.
    Gasser, A.
    Poprawe, R.
    Niessen, M.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2017, 48 (12) : 1304 - 1313
  • [30] Numerical modeling of coaxial powder stream in laser-powder-based Directed Energy Deposition process
    Guan, Xiaoyi
    Zhao, Yaoyao Fiona
    ADDITIVE MANUFACTURING, 2020, 34
12345