Transient liquid phase bonding of aluminum using aluminum base interlayer under argon flux

被引：0
|
作者：
Li, Xingeng [1 ]
Wang, Xuegang [1 ]
Yan, Fengjie [1 ]
Wang, Hong [1 ]
Wang, Xiaoming [1 ]
机构：
[1] Shandong Elect Power Res Inst, Jinan 250002, Peoples R China
来源：
ADVANCED MATERIALS AND PROCESS TECHNOLOGY, PTS 1-3 | 2012年 / 217-219卷
关键词：
transient liquid phase bonding; aluminum; mechanical property; MECHANICAL-PROPERTIES; WELDING PARAMETERS; MICROSTRUCTURE;
D O I：
10.4028/www.scientific.net/AMM.217-219.1917
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An aluminum base interlayer was used for transient liquid phase bonding of pure aluminum under argon flux. The bonding was carried out at 595 degrees C for 2 minutes under 7MPa. Microstructure of the joint was studied with SEM and EDX, and the mechanical properties were analyzed by tensile test and bending test. A homogenous bonding zone is observed in the joint. The defects in the joint are silicon oxides and voids. The tensile strength of the joint is 190MPa, and no failure occurs when the joint is bent to 180 degrees. This indicates that TLP bonding can produce a strong and ductile Aluminum joint, which is equivalent to the base metal.
引用
收藏
页码：1917 / 1920
页数：4
相关论文
共 50 条
  • [1] Transient liquid phase bonding of aluminum alloys
    Keikinzoku Yosetsu, 8 (09):
  • [2] Ultrasonic-assisted transient liquid phase bonding of SiC ceramic and aluminum alloy using an inactive Zn interlayer
    Zhao, Di
    Du, Wenkang
    Xiu, Ziyang
    Yan, Jiuchun
    MATERIALS CHARACTERIZATION, 2023, 200
  • [3] DIFFUSION BONDING AND TRANSIENT LIQUID PHASE JOINING OF TITANIUM TO AISi 304 STAINLESS STEEL WITH AN ALUMINUM INTERLAYER
    Konieczny, Marek
    Szwed, Bartlomiej
    Mola, Renata
    METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2015, : 1513 - 1518
  • [4] Direct-bonded aluminum on aluminum nitride substrates by transient liquid phase bonding
    Kuromitsu, Yoshirou
    Nagatomo, Yoshiyuki
    Akiyama, Kazuhiro
    Shibata, Naoya
    Ikuhara, Yuichi
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2017, 125 (03) : 165 - 167
  • [5] Transient Liquid-Phase Diffusion Bonding of Aluminum Metal Matrix Composite Using a Mixed Cu-Ni Powder Interlayer
    Joydeep Maity
    Tapan Kumar Pal
    Journal of Materials Engineering and Performance, 2012, 21 : 1232 - 1242
  • [6] Transient Liquid-Phase Diffusion Bonding of Aluminum Metal Matrix Composite Using a Mixed Cu-Ni Powder Interlayer
    Maity, Joydeep
    Pal, Tapan Kumar
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (07) : 1232 - 1242
  • [7] Transient liquid phase bonding of steel using an Fe–B interlayer
    Nicolas Di Luozzo
    Marcelo Fontana
    Bibiana Arcondo
    Journal of Materials Science, 2007, 42 : 4044 - 4050
  • [8] Transient liquid phase bonding of TiC reinforced magnesium metal matrix composites (TiCP/AZ91D) using aluminum interlayer
    Gu, X. Y.
    Sun, D. Q.
    Liu, L.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 487 (1-2): : 86 - 92
  • [9] Transient Liquid Phase Bonding of Semi-Solid Metal 7075 Aluminum Alloy Using ZA27 Zinc Alloy Interlayer
    Meengam, Chaiyoot
    Dunyakul, Yongyuth
    Maunkhaw, Dech
    Chainarong, Suppachai
    METALS, 2018, 8 (08):
  • [10] LIQUID-PHASE BONDING OF ALUMINUM AND ALUMINUM NICALON COMPOSITE USING COPPER INTERLAYERS
    BUSHBY, RS
    SCOTT, VD
    MATERIALS SCIENCE AND TECHNOLOGY, 1993, 9 (05) : 417 - 423
12345