Deformation-Induced Martensitic Transformation Behavior in Cold-Rolled AISI304 Stainless Steels

被引：18
|
作者：
Li, Yongfeng [1 ,2 ]
Bu, Fuming [3 ]
Kan, Wenbin
Pan, Hongliang [4 ]
机构：
[1] Henan Mech & Elect Engn Coll, Dept Mech & Elect Engn, Xinxiang, Peoples R China
[2] Henan Inst Sci & Technol, Sch Mech & Elect Engn, Xinxiang, Peoples R China
[3] Baoshan Iron & Steel Co Ltd, Shanghai, Peoples R China
[4] E China Univ Sci & Technol, Sch Mech & Power Engn, Shanghai 200237, Peoples R China
来源：
MATERIALS AND MANUFACTURING PROCESSES | 2013年 / 28卷 / 03期
关键词：
Deformation; Martensite; Mechanisms; Microstructure; Rolling; Stainless; Steels; Transformation; HYDROGEN; GAMMA;
D O I：
10.1080/10426914.2012.667897
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
AISI 304 stainless steels have been cold-rolled to different thickness reduction degrees, and consequently a deformation-induced martensite phase transformation takes place in the specimens. Metallurgical microscopy was used to study the microstructure and morphology of the specimens. X-ray diffraction was also used to investigate deformation-induced transformation. Martensite phase content was determined using a Ferrite Content Measuring Instrument. The evolution of the microstructure change and the mechanism of phase transformation by varying cold-rolled thickness reduction degree were discussed.
引用
收藏
页码：256 / 259
页数：4
相关论文
共 50 条
  • [41] ANELASTIC BEHAVIOR OF COLD-ROLLED 304-L STAINLESS-STEEL
    QUIROGA, J
    DESALVA, AG
    MONDINO, M
    LAMAGNA, A
    CARO, JA
    JOURNAL DE PHYSIQUE, 1985, 46 (C-10): : 661 - 664
  • [42] Effect of solution treatment on the transformation behaviour of cold-rolled duplex stainless steels
    Lai, JKL
    Wong, KW
    Li, DJ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 203 (1-2): : 356 - 364
  • [43] Johnson-Mehl-Avrami-Kolmogorov (JMAK-type) Analysis of Deformation-Induced Martensitic Transformation in AISI 304L Stainless Steel
    Sohrabi, Mohammad Javad
    Mirzadeh, Hamed
    Sadeghpour, Saeed
    Mahmudi, Reza
    IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING, 2023, 20 (04) : 1 - 9
  • [44] Use of in-situ TEM to characterize the deformation-induced martensitic transformation in 304 stainless steel at cryogenic temperature
    Liu, J.
    Kaoumi, D.
    MATERIALS CHARACTERIZATION, 2018, 136 : 331 - 336
  • [45] Deformation-induced martensitic transformation and workhardening of type 304 stainless steel sheet during draw-bending
    Ishimaru, Eiichiro
    Hamasaki, Hiroshi
    Yoshida, Fusahito
    11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 : 921 - 926
  • [46] The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel
    Das, Yadunandan B.
    Forsey, Alexander N.
    Kelleher, Joe
    Kabra, Saurabh
    Fitzpatrick, Michael E.
    Simm, Thomas H.
    Gungor, Salih
    Moat, Richard J.
    MATERIALS SCIENCE AND TECHNOLOGY, 2018, 34 (17) : 2114 - 2125
  • [47] Electron diffraction artefacts of the deformation twins and deformation-induced martensite in an AISI 304 stainless steel
    Zhang, Zihao
    Wang, Xin
    Wang, Fengyan
    Li, Changji
    Zhang, Hongwang
    Materials Characterization, 2025, 224
  • [48] DEFORMATION-INDUCED TEXTURE IN COLD-ROLLED AG SHEATHED BI(2223) TAPES
    GRASSO, G
    PERIN, A
    FLUKIGER, R
    PHYSICA C, 1995, 250 (1-2): : 43 - 49
  • [49] Deformation-induced martensitic transformation in 316L stainless steels fabricated by laser powder bed fusion
    Ni, Xiaoqing
    Kong, Decheng
    Wu, Wenheng
    Zhang, Liang
    Dong, Chaofang
    MATERIALS LETTERS, 2021, 302
  • [50] Study on Morphology of Martensites Transformation Induced by Explosive Shock Loading in AISI304 Stainless Steel
    Wang H.
    Xinba Y.
    Li X.
    Cailiao Daobao/Materials Reports, 2022, 36 (10):
12345