Experimental Investigation of Nanosecond Laser Ablation of Carbon Nanotubes

被引:0
|
作者
Pachon, Oscar [1 ]
Ma, J. [1 ]
Schaper, Nicholas [2 ]
Jahan, M. P. [3 ]
Lei, Shuting [4 ]
Kuljanishvili, Irma [5 ]
机构
[1] St Louis Univ, Dept Aerosp & Mechan Engn, St Louis, MO USA
[2] St Louis Univ, Dept Phys, St Louis, MO USA
[3] Miami Univ, Dept Mech & Mfg Engn, Oxford, OH 45056 USA
[4] Kansas State Univ Manhatta, Dept Ind Mfg Syst Engn, Manhattan, KS USA
[5] St Louis Univ, Dept Phys, St Louis, MO USA
关键词
Carbon Nanotubes (CNTs); Laser ablation; Scanning Electron Microscopy (SEM); and Raman Spectroscopy; GRAPHENE;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Carbon nanotubes (CNTs) have been a subject of development and investigation in the last two decades due to their superior physical and chemical properties, such as high electrical conductivity, high thermal conductivity, high mechanical and elastic properties, and relative inexpensiveness. This paper aims to grow CNTs in the lab and then investigate its manufacturability and relevant properties changes using the laser ablation process. The CNTs were grown using Chemical Vapor Deposition (CVD) process. The catalyst used for the growth was Iron on a Silicon substrate. The average size of the substrate samples is 5 mm by 5 mm. Continuum Surelite Class III laser with 1064 nm wavelength of single pulse mode is used to ablate the CNTs to assess property changes in CNTs resulting from laser-matter interaction. The laser beam energy and beam diameter are varied to investigate their influences on properties changes in CNTs. The laser beam energy ranges from 0.063 J to 0.35 J and the beam diameter is adjusted using an optical lens, for which the focal length is 150 mm. Twelve samples have been tested and Scanning Electron Microscopy (SEM) and Raman Spectroscopy have been used to characterize the samples before and after laser ablation. A Raman spectrum was taken 4 to 6 times for each of the samples before the ablation. The density of the population for both SWCNTs and MWCNTs is demonstrated on the spectrum. It is found that when 0.153 J is used with the distance between sample and lens being equal to the focal length of the lens, SEM imaging and Raman Spectrum show a bright burned circumference caused by the laser beam. The CNTs at a distance of 200 micrometers around are found to be broken down as well due to the heat propagation from the laser beam. The application of laser can be used to reduce the electrical conductivity from a CNT network without damaging silicon substrate, which could expand the application of CNTs in the Electronics industry.
引用
收藏
页数:8
相关论文
共 50 条
  • [21] Investigation on sapphire ablation by femtoseeond-nanosecond dual beam laser
    Wang MaoLu
    Mei Wei
    Yang Lijun
    Wang Yang
    SCIENTIA SINICA-PHYSICA MECHANICA & ASTRONOMICA, 2020, 50 (03)
  • [22] Investigation of Ag nanoparticles produced by nanosecond pulsed laser ablation in water
    Nikolov, A. S.
    Nedyalkov, N. N.
    Nikov, R. G.
    Atanasov, P. A.
    Alexandrov, M. T.
    Karashanova, D. B.
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2012, 109 (02): : 315 - 322
  • [23] Investigation of Ag nanoparticles produced by nanosecond pulsed laser ablation in water
    A. S. Nikolov
    N. N. Nedyalkov
    R. G. Nikov
    P. A. Atanasov
    M. T. Alexandrov
    D. B. Karashanova
    Applied Physics A, 2012, 109 : 315 - 322
  • [24] Experimental Research for Effects of Nanosecond Laser on GAP Film Ablation Characteristics
    Zhu C.
    Jin X.
    Chen G.
    Liu Z.-R.
    1907, Journal of Propulsion Technology (38): : 1907 - 1913
  • [25] Experimental investigation on colloidal alumina nanoparticles produced by collinear nanosecond double-pulse laser ablation in liquid
    Mahdieh, M. H.
    Fattahi, B.
    Jafarabadi, M. Akbari
    XXI INTERNATIONAL SYMPOSIUM ON HIGH POWER LASER SYSTEMS AND APPLICATIONS 2016, 2017, 10254
  • [26] Numerical simulation and experimental analysis on nanosecond laser ablation of titanium alloy
    Zhao, Wen
    Yu, Zhou
    Hu, Jun
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 99 : 138 - 151
  • [27] Thermal modeling and experimental study of infrared nanosecond laser ablation of silicon
    Tao, Sha
    Wu, Benxin
    Zhou, Yun
    Gao, Yibo
    JOURNAL OF APPLIED PHYSICS, 2009, 106 (12)
  • [28] Synthesis of carbon nanotubes by the laser ablation method: Effect of laser wavelength
    Chrzanowska, Justyna
    Hoffman, Jacek
    Malolepszy, Artur
    Mazurkiewicz, Marta
    Kowalewski, Tomasz A.
    Szymanski, Zygmunt
    Stobinski, Leszek
    PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 2015, 252 (08): : 1860 - 1867
  • [29] Experimental investigation on ablation mode of laser propulsion
    Cai, Jian
    Hu, Xiao-Jun
    Tang, Zhi-Ping
    Tuijin Jishu/Journal of Propulsion Technology, 2008, 29 (03): : 371 - 376
  • [30] Experimental investigation on femtosecond laser ablation of polycarbonate
    Qi, Litao
    Hu, Jinping
    ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3, 2013, 652-654 : 2359 - 2362