Durability of ZDDP Tribofilms Formed in DLC/DLC Contacts

The tribological properties of diamond-like carbon (DLC) coatings have drawn much attention of OEMs and lubricant manufacturers in recent years. It is important to know whether conventional friction modifier and antiwear additives can form durable films and work as effectively with DLCs as they normally do on steel surfaces. In this study, the film-forming and friction properties of the antiwear additive ZDDP and the strength of tribofilms formed by this additive on five widely used DLC types, namely a-C:H, a-C:H:W, a-C:H:WC, Si-DLC and ta-C, have been investigated. It is found that ZDDP-derived tribofilms form on all the DLCs but exhibit different friction characteristics based on DLC type. With all DLCs, the amount of tribofilm elements measured after durability tests was less than that measured initially. Over 90 % of thiophosphate and 70 % of sulphide/sulphate were lost during durability tests. ZDDP tribofilms were found to be strongly adhered on Si-DLC and a-C:H compared with the other DLCs. The ZDDP tribofilms formed in DLC/DLC contact appear to be similar in structure to those formed in steel/steel contact but not to exhibit the antiwear performance seen in steel/steel contacts.