High deposition rate processes for the fabrication of microcrystalline silicon thin films

The increase of deposition rate of microcrystalline silicon absorber layers is an essential point for cost reduction in the mass production of thin-film silicon solar cells. In this work we explored a broad range of plasma enhanced chemical vapor deposition (PECVD) parameters in order to increase the deposition rate of intrinsic microcrystalline silicon layers keeping the industrial relevant material quality standards. We combined plasma excitation frequencies in the VHF band with the high pressure high power depletion regime using new deposition facilities and achieved deposition rates as high as 2.8 nm/s. The material quality evaluated from photosensitivity and electron spin resonance measurements is similar to standard microcrystalline silicon deposited at low growth rates. The influence of the deposition power and the deposition pressure on the electrical and structural film properties was investigated. (C) 2012 Elsevier B.V. All rights reserved.