The Influence of Die Tilting on the Thermal Response and Die Attach Stress of a Bottom Exposed Package

被引:0
|
作者
Yue, Cong [1 ]
Lu, Mingzhen [1 ]
Niu, Zhiqiang [1 ]
机构
[1] Alpha & Omega Semicond, Shanghai, Peoples R China
关键词
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
In this paper, a study on thermal and mechanical performance of a power discrete package with different die sizes and non-uniform bond line thickness (BLT) variations is conducted by finite element analysis and experiment. Two different die sizes of 4.14x3.04x0.2mm (big die) and 1.78x0.88x0.2mm (small die) in IPAK package are used in this study to exam steady state junction-to-case thermal resistance (R-thJC). Meanwhile, the effect of die tilting variations on R-thJC is also analyzed. Based on the results, the influence of the die tilting on R-thJC is 10% and 8% between non-tilting and worst tilting on the big die and the small die respectively. The difference of R-thJC from experiment shows the quit close results. Transient thermal performance on different die tilting variations is also studied. The results show that the worst tilting case has about 8% larger R-thJC in junction temperature than non-tilting case. In addition to the thermal resistance, the Von Mises stress of soft solder used for die attach for the worst tilting case is 15% more than the non-tilting case, and the largest stress is located in the area where the solder becomes thinnest. The stress exceeds the solder tensile strength of 26-34Mpa in both cases. The worst tilting case has 2.5 times more plastic strain than the non-tilting case, and the largest strain is also concentrated in the thin solder area. The strain value is still bellow the elongation limitation of 0.23-0.33. While the TC500 testing for this two groups shows both chip and solder are safe.
引用
收藏
页码:684 / 689
页数:6
相关论文
共 50 条
  • [41] Development of Exposed Die Large Body to Die Size Ratio Wafer Level Package Technology
    Osenbach, J.
    Emerich, S.
    Golick, L.
    Cate, S.
    Chan, M.
    Yoon, S. W.
    Lin, Y. J.
    Wong, K.
    2014 IEEE 64TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2014, : 952 - 955
  • [42] High Temperature Endurable Die Attach Material for Power Electronics Package - Process Challenges
    Wai, Leong Ching
    Ding, Mian Zhi
    Tang, Gong Yue
    2017 IEEE 19TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC), 2017,
  • [43] Co-relationship of the Die Attach Machine Dynamic Impact Force Trend with Cracked Die Occurrences for Shrink Chip Package
    Tan, Yue Hang
    Liau, Wai Shan
    2018 IEEE 38TH INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY CONFERENCE (IEMT), 2018,
  • [44] Study on Creep Fatigue Behaviour of Soft Solders Die Attach for Power Package Applications
    Ge, Dandong
    Che, F. X.
    Tay, Yik Siong
    Gan, Swee Lee
    Yazid, Mohamad
    PROCEEDINGS OF THE 2012 IEEE 14TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE, 2012, : 77 - 83
  • [45] Sintered Ag & Cu Based Die attach for Power Package and Power Module Application
    Tamimoto, Hideaki
    Matsumura, Kazuki
    Nakagawa, Kazuyuki
    Ikura, Kenji
    Obama, C'hikara
    2024 13TH IEEE CPMT SYMPOSIUM JAPAN, ICSJ 2024, 2024, : 232 - 235
  • [46] Creep Properties of Soft Solder Die Attach with Ni Balls in Power Package Applications
    Che, F. X.
    Ge, Dandong
    Tal, Yik Siong
    Yazid, Mohamad
    Gan, Swee Lee
    2012 35TH IEEE/CPMT INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY SYMPOSIUM (IEMT), 2012,
  • [47] Cu wire Development for Thin QFN Package using Die Attach Film (DAF)
    Hsieh, Ho-Chin
    Wang, Li-Ching
    Lei, Wen-Pang
    Lin, Chang-Chih
    2013 8TH INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE (IMPACT), 2013, : 302 - 305
  • [48] Study of Thermal Stress Fluctuations at the Die-Attach Solder Interface Using the Finite Element Method
    Yan, Luchun
    Yao, Jiawen
    Dai, Yu
    Zhang, Shanshan
    Bai, Wangmin
    Gao, Kewei
    Yang, Huisheng
    Wang, Yanbin
    ELECTRONICS, 2022, 11 (01)
  • [49] An Analytical Thermal and Stress Analysis Tool for Die Attach Optimization in GaN Power Amplifier (PA) Applications
    Qi, Quan
    Monthei, Dean
    PROCEEDINGS OF THE 2012 IEEE 14TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE, 2012, : 136 - 141
  • [50] Reliability Optimization of Gold-Tin Eutectic Die Attach Layer in HEMT Package
    Zhang, Hao
    Fan, Jiajie
    Zhang, Jing
    Qian, Cheng
    XuejunFan
    Sun, Fenglian
    Zhang, Guoqi
    2016 13TH CHINA INTERNATIONAL FORUM ON SOLID STATE LIGHTING (SSLCHINA 2016), 2016, : 52 - 56