Crystallization temperature and crystallization ratio of mold flux

被引：0
|
作者：
Zhu, CY [1 ]
Han, WD
Liu, CJ
Jiang, MF
机构：
[1] Northeastern Univ, Shenyang 110004, Peoples R China
[2] Cent Iron & Steel Res Inst, Beijing 100081, Peoples R China
来源：
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL | 2005年 / 12卷 / 06期
关键词：
mold flux; crystallization temperature; crystallization ratio; viscosity; solidification temperature;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The factors influencing the crystallization ratio of mold flux were researched by rapid cooling technology, and the factors affecting crystallization temperature were studied by single thermocouple technique. The results showed that the crystallization ratio of mold flux increases with the basicity and the content of Na2O, CaF2, Li2O and NaF, and decreases with the increase of the content of Al2O3, MgO, BaO, MnO and B2O3. However the crystallization temperature of mold flux rises with the basicity and the content of NaF, Na2O and CaF2, and reduces with the increase of the content of Al2O3, MgO, BaO, MnO and B2O3. But for Li2O, crystallization temperature decreases firstly to a minimum value at 2%, and then increases gradually with the increase of Li2O.
引用
收藏
页码：23 / 26
页数：4
相关论文
共 50 条
  • [41] Effect of mold powder crystallization on heat transfer in continuous casting mold
    Watanabe, Keiji
    Suzuki, Makoto
    Murakami, Katsuhiko
    Kondo, Hirokazu
    Miyamoto, Akira
    Shiomi, Takaharu
    NKK Technical Review, 1997, (77): : 20 - 26
  • [42] Efficient optimization of crystallization conditions by manipulation of drop volume ratio and temperature
    Luft, Joseph R.
    Wolfley, Jennifer R.
    Said, Meriem I.
    Nagel, Raymond M.
    Lauricella, Angela M.
    Smith, Jennifer L.
    Thayer, Max H.
    Veatch, Christina K.
    Snell, Edward H.
    Malkowski, Michael G.
    Detitta, George T.
    PROTEIN SCIENCE, 2007, 16 (04) : 715 - 722
  • [43] The effect of crystallization of mold powder on the heat transfer in continuous casting mold
    Watanabe, K
    Suzuki, M
    Murakami, K
    Kondo, H
    Miyamoto, A
    Shiomi, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1997, 83 (02): : 115 - 120
  • [44] Estimation of Temperature Dependency on Crystallization Using the Critical Supersaturation Ratio (Sc)
    Nagamatsu, Daiki
    Sato, Norihito
    Takiyama, Hiroshi
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2017, 50 (08) : 666 - 668
  • [45] PHBV Crystallization under Injection Molding Conditions: Influence of Packing Pressure and Mold Temperature
    Sleiman, G. El Hajj
    Colomines, G.
    Deterre, R.
    Petit, I.
    Leroy, E.
    Belhabib, S.
    JOURNAL OF RENEWABLE MATERIALS, 2018, 6 (03) : 270 - 276
  • [46] A study of the crystallization behavior of a new mold flux used in the casting of transformation-induced-plasticity steels
    Wang, Wanlin
    Blazek, Kenneth
    Cramb, Alan
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2008, 39 (01): : 66 - 74
  • [47] In-Situ Study of Crystallization Behavior of a Mold Flux Using Single and Double Hot Thermocouple Technique
    Yang, Jian
    Cui, Yaru
    Wang, Lin
    Sasaki, Yasushi
    Zhang, Jianqiang
    Ostrovski, Oleg
    Kashiwaya, Yoshiaki
    STEEL RESEARCH INTERNATIONAL, 2015, 86 (06) : 636 - 643
  • [48] A Study of the Crystallization Behavior of a New Mold Flux Used in the Casting of Transformation-Induced-Plasticity Steels
    Wanlin Wang
    Kenneth Blazek
    Alan Cramb
    Metallurgical and Materials Transactions B, 2008, 39 : 66 - 74
  • [49] Effect of Al2O3 on the Crystallization of Mold Flux for Casting High Al Steel
    Zhou, Lejun
    Wang, Wanlin
    Zhou, Kechao
    METALLURGICAL AND MATERIALS TRANSACTIONS E-MATERIALS FOR ENERGY SYSTEMS, 2015, 2 (02): : 99 - 108
  • [50] Crystallization of CaO-SiO2-TiO2 slag as a candidate for fluorine free mold flux
    Nakada, Hideko
    Nagata, Kazuhiro
    ISIJ INTERNATIONAL, 2006, 46 (03) : 441 - 449
12345