Crystallization temperature and crystallization ratio of mold flux

被引：0
|
作者：
Zhu, CY [1 ]
Han, WD
Liu, CJ
Jiang, MF
机构：
[1] Northeastern Univ, Shenyang 110004, Peoples R China
[2] Cent Iron & Steel Res Inst, Beijing 100081, Peoples R China
来源：
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL | 2005年 / 12卷 / 06期
关键词：
mold flux; crystallization temperature; crystallization ratio; viscosity; solidification temperature;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The factors influencing the crystallization ratio of mold flux were researched by rapid cooling technology, and the factors affecting crystallization temperature were studied by single thermocouple technique. The results showed that the crystallization ratio of mold flux increases with the basicity and the content of Na2O, CaF2, Li2O and NaF, and decreases with the increase of the content of Al2O3, MgO, BaO, MnO and B2O3. However the crystallization temperature of mold flux rises with the basicity and the content of NaF, Na2O and CaF2, and reduces with the increase of the content of Al2O3, MgO, BaO, MnO and B2O3. But for Li2O, crystallization temperature decreases firstly to a minimum value at 2%, and then increases gradually with the increase of Li2O.
引用
收藏
页码：23 / 26
页数：4
相关论文
共 50 条
  • [1] Crystallization Temperature and Crystallization Ratio of Mold Flux
    ZHU Chuan-yun1
    2. Central Iron and Steel Research Institute
    JournalofIronandSteelResearch(International), 2005, (06) : 23 - 26
  • [2] Effect of Al/Si ratio on the crystallization properties and structure of mold flux
    Chen, Jian
    He, Feng
    Xiao, Yongli
    Xie, Mongqin
    Xie, Junlin
    Zhang, Wentao
    Shi, Jiang
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 216 : 19 - 28
  • [3] Development and Application of Mold Flux With Low Basicity and High Crystallization Ratio
    Zeng Jian-hua
    Li Gui-jun
    Yang Su-bo
    Zhang Da-de
    Zhao Ke-wen
    Wang Qian
    Wang Yu
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2008, 15 : 742 - 746
  • [4] The observation of mold flux crystallization on radiative heat transfer
    Wang, WL
    Cramb, AW
    ISIJ INTERNATIONAL, 2005, 45 (12) : 1864 - 1870
  • [5] Influence of Basicity of Mold Flux on its Crystallization Rate
    Hanao, Masahito
    ISIJ INTERNATIONAL, 2013, 53 (04) : 648 - 654
  • [6] Influence of Basicity of Mold Flux on its Crystallization Rate
    Hanao, Masahito
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2014, 100 (08): : 951 - 957
  • [7] STUDY ON CRYSTALLIZATION PROPERTIES OF MOLD FLUX IN MAGNETIC FIELD
    Zhang, Congjing
    Wang, Yu
    Hu, Lang
    Zhu, Mingmei
    Wang, Hongpo
    6TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2015, : 707 - 714
  • [8] Analysis of the crystallization of mold flux for continuous casting of steel
    Mizuno, Hidenori
    Esaka, Hisao
    Shinozuka, Kei
    Tamura, Manabu
    ISIJ INTERNATIONAL, 2008, 48 (03) : 277 - 285
  • [9] Influence on the Crystallization Phase of Mold Flux by Magnetic Fields
    Zhao, Lu-ming
    Wang, Yu
    Zhao, Li
    9TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2018, : 557 - 567
  • [10] Research on effects of MnO on kinetics of mold flux crystallization
    College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
    Guocheng Gongcheng Xuebao, 2008, SUPPL. (185-188):
12345