Covariance-Based Barrage Jammer Nulling Filter for Surveillance Radar

A covariance-based algorithm is proposed to find a barrage jammer suppression filter for surveillance radar with an adaptive array. The conventional adaptive beamformer (ABF) or adaptive sidelobe canceller (ASLC) with auxiliary antennas can be used successfully in sidelobe jammer rejection. When a jammer shares the same bearing with the target of interest, however, those methods inherently cancel the target in their attempt to null the jammer. By exploiting the jammer multipath scattered returns incident from other angles, the proposed algorithm uses only the auto-covariance matrix of the sample data produced by stacking range cell returns in a pulse repetition interval (PRI). It does not require estimation of direction of arrival (DOA) or time difference of arrival (TDOA) of multipath propagation, thus making it applicable to electronic countermeasure (ECM) environments with high power barrage jammers and it provides the victim radar with the ability to null both the sidelobe (sidebeam) and mainlobe (mainbeam) jammers simultaneously. Numeric simulations are provided to evaluate the performance of this filter in the presence of an intensive barrage jammer with jammer-to-signal ratio (JSR) greater than 30 dB, and the achieved signal-to-jammer-plus-noise ratio (SJNR) improvement factor (IF) exceeds 46 dB.