Liquid circulation and critical gas velocity in slurry bubble column with short size draft tube

被引：14
|
作者：
Kojima, H [1 ]
Sawai, J [1 ]
Uchino, H [1 ]
Ichige, T [1 ]
机构：
[1] Kanagawa Inst Technol, Dept Appl Chem, Atsugi, Kanagawa 2430292, Japan
来源：
CHEMICAL ENGINEERING SCIENCE | 1999年 / 54卷 / 21期
关键词：
slurry bubble column; critical gas velocity; complete suspension; circulation rate; short size draft tube; solid distribution;
D O I：
10.1016/S0009-2509(99)00237-7
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Longitudinal solid distribution and liquid circulation were discussed experimentally in slurry bubble column with short size draft tube. Solid distribution along the column axis was well explained by one-dimensional dispersion model. The relation between circulation rate and critical gas velocity for complete suspension was discussed taking into account the mechanism for suspending solid particle in horizontal pipe. (C) 1999 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：5181 / 5185
页数：5
相关论文
共 50 条
  • [31] Dense gas-liquid-solid flow in a slurry bubble column: Measurements of dynamic characteristics, gas volume fraction and bubble size distribution
    Tyagi, Parul
    Buwa, Vivek V.
    CHEMICAL ENGINEERING SCIENCE, 2017, 173 : 346 - 362
  • [32] Effects of EOR chemicals and superficial gas velocity on bubble size and gas holdup of a bubble column
    Orlando, Aloisio E., Jr.
    Barca, Luiz F.
    Klein, Tania S.
    Medronho, Ricardo A.
    OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES, 2019, 74
  • [33] Gas-liquid mass transfer in a slurry bubble column at high slurry concentrations and high gas velocities
    Vandu, CO
    van den Berg, B
    Krishna, R
    CHEMICAL ENGINEERING & TECHNOLOGY, 2005, 28 (09) : 998 - 1002
  • [34] Mass transfer into highly viscous liquid circulated forcibly in bubble column with draft tube
    Terasaka, K
    Tsuge, H
    KAGAKU KOGAKU RONBUNSHU, 2001, 27 (04) : 443 - 448
  • [35] FLOW CHARACTERISTICS OF BUBBLE-COLUMN WITH PERFORATED DRAFT TUBE IN VISCOUS-LIQUID
    BANDO, Y
    NISHIMURA, M
    HAYASHI, A
    HIURA, S
    IDO, S
    IDOTA, A
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1995, 28 (02) : 225 - 227
  • [36] PARTICLE-LIQUID MASS-TRANSFER IN A BUBBLE-COLUMN WITH A DRAFT TUBE
    KUSHALKAR, KB
    PANGARKAR, VG
    CHEMICAL ENGINEERING SCIENCE, 1994, 49 (01) : 139 - 144
  • [37] EFFECTS OF PARTITION PLATES ON GAS HOLDUP IN A BUBBLE-COLUMN WITH AND WITHOUT A DRAFT TUBE
    YAMASHITA, F
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1993, 26 (06) : 742 - 744
  • [38] BIOLOGICAL NITROGEN REMOVAL IN A BUBBLE COLUMN WITH A DRAFT TUBE
    HANO, T
    MATSUMOTO, M
    KURIBAYASHI, K
    HATATE, Y
    CHEMICAL ENGINEERING SCIENCE, 1992, 47 (13-14) : 3737 - 3744
  • [39] FLOW CHARACTERISTICS IN A BUBBLE COLUMN WITH PERFORATED DRAFT TUBE
    BANDO, Y
    KURAISHI, M
    NISHIMURA, M
    HATTORI, M
    TOYODA, K
    KAWASE, N
    KAGAKU KOGAKU RONBUNSHU, 1988, 14 (05) : 663 - 669
  • [40] GAS HOLDUP AND VOLUMETRIC LIQUID-PHASE MASS-TRANSFER COEFFICIENT IN BUBBLE COLUMN WITH DRAFT TUBE AND WITH GAS DISPERSION INTO ANNULUS
    KOIDE, K
    SATO, H
    IWAMOTO, S
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1983, 16 (05) : 407 - 413
12345