Fabrication and consolidation of TiNx by pulsed electric current sintering

被引：1
|
作者：
Suarez-Vazquez, Santiago I. [1 ]
Nanko, Makoto [1 ]
机构：
[1] Nagaoka Univ Technol, Dept Mech Engn, 1603-1 Kamitomioka, Nagaoka, Niigata 9402188, Japan
来源：
ECO-MATERIALS PROCESSING AND DESIGN XIV | 2013年 / 761卷
关键词：
Titanium nitride; Pulsed electric current sintering; Grain growth; Densification; TITANIUM; TIN1-X;
D O I：
10.4028/www.scientific.net/MSF.761.55
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A new and simple method is proposed to fabricate fully dense and single fcc phase of substoichiometric titanium nitride (TiNx). Powders mixture composed of titanium hydride (TiH2) and titanium nitride (TiN) was consolidated by using pulsed electric current sintering. All samples showed relative density values higher than 98% with larger grain size at lower nitrogen concentration. Lattice parameter increased linearly with increasing [N]/[Ti] ratio. In addition, TiNx with substoichiometric compositions was more easily densified than stoichiometric TiN. The addition of TiH2 improves the sinterability of the samples preserving the fcc phase characteristic of TiN.
引用
收藏
页码：55 / +
页数：2
相关论文
共 50 条
  • [31] Fabrication of Al2O3/TiC/Ni graded materials by pulsed-electric current sintering
    Ren, YP
    Lin, JS
    Qiao, GJ
    Jin, ZH
    FUNCTIONALLY GRADED MATERIALS 2000, 2001, 114 : 349 - 356
  • [32] INFLUENCE OF INTERNAL PULSED CURRENT ON THE SINTERING BEHAVIOR OF PULSED CURRENT SINTERING PROCESS
    Misawa, T.
    Shikatani, N.
    Kawakami, Y.
    Enjoji, T.
    Ohtsu, Y.
    THERMEC 2009, PTS 1-4, 2010, 638-642 : 2109 - +
  • [33] Application of pulsed electric-current sintering technique to interfacial bonding
    Saida, Kazuyuki
    Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2002, 71 (03): : 30 - 34
  • [34] Properties and rapid consolidation of binderless nanostuctured tantalum carbide by pulsed current activated sintering
    Shon, In-Jin
    Kim, Byung-Ryang
    Ko, In-Yong
    Nam, Kee-Seok
    Doh, Jung-Mann
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2010, 11 (04): : 498 - 502
  • [35] Mechanical Synthesis and Fabrication of Nanostructured TiCo Alloy by Pulsed Current Activated Sintering
    Shon, In-Jin
    Song, Ha-Young
    Cho, Sung-Wook
    Kim, Wonbaek
    Suh, Chang-Yul
    KOREAN JOURNAL OF METALS AND MATERIALS, 2012, 50 (01): : 39 - 44
  • [36] Fabrication of a thick surface layer of Al3Ti on Ti substrate by reactive-pulsed electric current sintering
    Matsubara, T
    Shibutani, T
    Uenishi, K
    Kobayashi, KF
    INTERMETALLICS, 2000, 8 (07) : 815 - 822
  • [37] Fabrication of B4C/TiB2 composite ceramics using pulsed electric current pressure sintering
    Hirota K.
    Taniguchi T.
    Goto N.
    Kato M.
    Taguchi H.
    Hirota, Ken (khirota@mail.doshisha.ac.jp), 1600, Journal of the Japan Society of Powder and Powder Metallurgy, 15 Morimoto-cho Shimogamo, Sakyo-Ku Kyoto, Japan (64): : 538 - 546
  • [38] In situ sintering bonding of oxide dispersion strengthened superalloys using pulsed electric current sintering technique
    Nishimoto, K
    Saida, K
    Tsuduki, R
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2004, 9 (06) : 493 - 500
  • [39] Properties and rapid consolidation of (W,Ti)C-CNT by pulsed current activated sintering
    Oh, Seung-Jin
    Kim, Byung-Su
    Yoon, Jin-Kook
    Shon, In-Jin
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2016, 17 (03): : 156 - 160
  • [40] Consolidation of Binder less Nanostructured TiC by Pulsed Current Activated Sintering and Its Mechanical Properties
    Shon, In-Jin
    Kim, Byung-Ryang
    Ko, In-Yong
    Doh, Jung-Mann
    Yoon, Jin-Kook
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2011, 11 (02) : 1489 - 1492
12345