Determination of Para-Aramid Single Fabric Shear by Yarn Pull-Out and Analysis by Statistical Model

被引：1
|
作者：
Bilisik, Kadir [1 ]
机构：
[1] Erciyes Univ, Fac Engn, Dept Text Engn, TR-38039 Talas Kayseri, Turkey
来源：
FIBERS AND POLYMERS | 2013年 / 14卷 / 04期
关键词：
Fabric shear; Single and multiple yam pull-outs; Shear rigidity; Pull-out method; Statistical modelling; BIAS EXTENSION; WOVEN FABRICS; BEHAVIOR; DEFORMATION; COMPOSITE;
D O I：
10.1007/s12221-013-0603-8
中图分类号：
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号：
0805 ; 080502 ; 0821 ;
摘要：
The aim of this study was to determine the para-aramid fabric shear by the pull-out method. The fabric sample dimensions and the number of pull-out ends were identified as important parameters. Fabric shear depended on fabric density. Fabric shear strength increased when the number of pulled ends increased. When the fabric length increased, fabric shear strength generally increased. The number of pulled ends and the fabric sample dimensions influenced the fabric shear rigidity. Shear jamming angles were found based on the number of pulled ends. The results showed that para-aramid fabric shear could be measured by yam pull-out test.
引用
收藏
页码：603 / 615
页数：13
相关论文
共 50 条
  • [41] ANALYSIS OF THE SINGLE-FIBER PULL-OUT TEST BY THE USE OF RAMAN-SPECTROSCOPY .1. PULL-OUT OF ARAMID FIBERS FROM AN EPOXY-RESIN
    PATRIKIS, AK
    ANDREWS, MC
    YOUNG, RJ
    COMPOSITES SCIENCE AND TECHNOLOGY, 1994, 52 (03) : 387 - 396
  • [42] Investigation of the effect of para-aramid fabric impregnation with shear thickening fluid on quasi-static stab resistance
    Zielinska, Dorota
    Delczyk-Olejniczak, Bogumila
    Wierzbicki, Lukasz
    Wilbik-Halgas, Bozena
    Struszczyk, Marcin Henryk
    Leonowicz, Marcin
    TEXTILE RESEARCH JOURNAL, 2014, 84 (15) : 1569 - 1577
  • [43] Multiple Yarn Pull-out Response on E-Glass Twill 4/1 Woven Fabric
    Zulkifli, Nasrun Faris
    Yahya, Faizul
    Ahmad, Rozi
    Abd Ghani, Suzaini
    INTERNATIONAL TRANSACTION JOURNAL OF ENGINEERING MANAGEMENT & APPLIED SCIENCES & TECHNOLOGIES, 2021, 12 (09):
  • [44] XPS ANALYSIS OF MODEL PARA-ARAMID COMPOUNDS AND POLY(PARA-PHENYLENE TEREPHTHALAMIDE) FIBERS
    CHAPPELL, PJC
    WILLIAMS, DR
    GEORGE, GA
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 1990, 134 (02) : 385 - 396
  • [45] Yarn pull-out behavior of plain woven Kevlar fabrics: Effect of yarn sizing, pullout rate, and fabric pre-tension
    Nilakantan, Gaurav
    Gillespie, John W., Jr.
    COMPOSITE STRUCTURES, 2013, 101 : 215 - 224
  • [46] YARN PULL-OUT AND DROP WEIGHT IMPACT PERFORMANCE OF SHEAR THICKENING FLUID IMPREGNATED BALLISTIC FABRICS
    SARIÇAM, Canan
    OKUR, Nazan
    Tekstil ve Muhendis, 2023, 30 (131): : 236 - 242
  • [47] Modeling of filament level plain woven Kevlar 49 fabric for accurate prediction of yarn pull-out behavior
    Ma, Ying
    He, Zhifei
    Chen, Xiang
    Deng, Congying
    Zhao, Yang
    Lu, Sheng
    TEXTILE RESEARCH JOURNAL, 2022, 92 (19-20) : 3704 - 3718
  • [48] Enhanced finite element analysis of shear connector pull-out based on cohesive zone model
    Lin, Jianping
    Wang, Jinfeng
    Xu, Rongqiao
    Ling, Daosheng
    Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2014, 46 (12): : 78 - 83
  • [49] Analysis and stick-slip properties of woven fabric in pull-out method
    Bilisik, Kadir
    INDUSTRIA TEXTILA, 2014, 65 (04): : 181 - 189
  • [50] FEM analysis and comparison of single fiber pull-out tests
    Feih, S
    Schwartz, P
    ADVANCED COMPOSITES LETTERS, 1997, 6 (04) : 99 - 102
12345