Study on dynamic strength model of contact layer in quick-point grinding

被引：16
|
作者：
Xiu, SC [1 ]
Cai, GQ [1 ]
Li, CH [1 ]
机构：
[1] Northeastern Univ, Sch Mech Engn & Automat, Shenyang 110004, Peoples R China
来源：
ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XIII | 2006年 / 304-305卷
关键词：
quick-point grinding; strain rate; impact damage; dynamic strength;
D O I：
10.4028/www.scientific.net/KEM.304-305.570
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Ultra-high grinding speed and point contact are the salient natures of Quick-point grinding. Based on the damage dynamics theory, there are impact damages with a lot of micro-cracks and micro-defects and adiabatic shearing caused by ultra-high strain rate in the contact layer in such grinding manner. The micro-damages are relation to the strain rate and the materials properties, and increase with raise of strain rate. Because of the weakening effect of strain rate, the dynamic strength of the contact layer in Quick-point grinding is decreased and the grinding performance of ductile and brittle materials is also changed. The dynamic strength model of the contact layer in Quick-point grinding was built in this paper, and the weakening effects of strain rate caused by impact micro-damages on the dynamic strength of the layer and the materials removal mechanism in grinding layer were analyzed through the study on the theory and the experiments.
引用
收藏
页码：570 / 574
页数：5
相关论文
共 50 条
  • [1] Study on side contact layer model and parameters in quick-point grinding
    Xiu, Shichao
    Cai, Guangqi
    Li, Changhe
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 781 - +
  • [2] Edge grinding layer model and parameters in quick-point grinding
    School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China
    Jixie Gongcheng Xuebao, 2006, 11 (197-201):
  • [3] Theoretical Model of Grinding Force in Quick-point Grinding
    Qiu, J.
    Gong, Y. D.
    Liu, Y. M.
    Cheng, J.
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL 1: ADVANCED MANUFACTURING TECHNOLOGY AND EQUIPMENT, AND MANUFACTURING SYSTEMS AND AUTOMATION, 2009, 626-627 : 75 - 80
  • [4] Study on Effect of Material Strain Rate in Contact Layer on Surface Integrity in Quick-point Grinding
    Xiu, S. C.
    Li, C. H.
    Cai, G. Q.
    ADVANCED DESIGN AND MANUFACTURE TO GAIN A COMPETITIVE EDGE: NEW MANUFACTURING TECHNIQUES AND THEIR ROLE IN IMPROVING ENTERPRISE PERFORMANCE, 2008, : 199 - +
  • [5] Study on Abrasive Geometry of Quick-point Grinding
    Yuan, Suoxian
    Xie, Dongna
    Gong, Yadong
    ADVANCES IN ABRASIVE TECHNOLOGY XI, 2009, 389-390 : 235 - 239
  • [6] Study on abrasive geometry of quick-point grinding
    Yuan, Suoxian
    Xie, Dongna
    Gong, Yadong
    Key Engineering Materials, 2009, 389-390 : 235 - 239
  • [7] Researches on Effect of Impact Micro-damages in Contact Layer on Machinability in Quick-point Grinding
    Xiu, Shichao
    Yuan, Suoxian
    Cai, Guangqi
    ADVANCES IN ABRASIVE TECHNOLOGY XI, 2009, 389-390 : 229 - 234
  • [8] Study on surface finish mechanism in quick-point grinding
    Xiu, S.
    Cai, G.
    Li, C.
    INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS IN TECHNOLOGY, 2007, 29 (2-4) : 163 - 167
  • [9] Study on surface finish mechanism in quick-point grinding
    Xiu, S. C.
    Cai, G. Q.
    Li, C. H.
    ADVANCES IN ABRASIVE MACHINING AND SURFACING TECHNOLOGIES, PROCEEDINGS, 2006, : 403 - +
  • [10] Experiment Study on Vitrified Bonded Wheels of Quick-point Grinding
    Pang, Z. R.
    Yu, T. B.
    Su, C.
    Wang, J. R.
    Wang, W. S.
    SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING, 2008, 53-54 : 237 - +
12345