Surface Modification of Austenitic Steel by Various Glow-Discharge Nitriding Methods

被引：8
|
作者：
Borowski, Tomasz [1 ]
Adamczyk-Cieslak, Boguslawa [1 ]
Brojanowska, Agnieszka [1 ]
Kulikowski, Krzysztof [1 ]
Wierzchon, Tadeusz [1 ]
机构：
[1] Warsaw Univ Technol, Fac Mat Sci & Engn, PL-02507 Warsaw, Poland
来源：
MATERIALS SCIENCE-MEDZIAGOTYRA | 2015年 / 21卷 / 03期
关键词：
glow-discharge nitriding; active screen; plasma and cathodic potential; DC and pulsating current; austenitic steel; CATHODIC CAGE; STAINLESS-STEEL; SCREEN; SAMPLE;
D O I：
10.5755/j01.ms.21.3.7404
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The article presents a characterisation of nitrided layers produced on austenitic X2CrNiMo17-12-2 (AISI 316L) stainless steel in the course of glow-discharge nitriding at cathodic potential, at plasma potential, and at cathodic potential incorporating an active screen. All processes were carried out at 440 degrees C under DC glow-discharge conditions and in 100 kHz frequency pulsed current. The layers were examined in terms of their microstructure, phase and chemical composition, morphology, surface roughness, hardness, wear, and corrosion resistance. Studies have shown a strong influence of the type of nitriding method used and of the electrical conditions on the microstructure and properties of the diffusion layers formed.
引用
收藏
页码：376 / 381
页数：6
相关论文
共 50 条
  • [31] NITRIDING OF STAINLESS-STEEL IN A GLOW-DISCHARGE IN CROSSED ELECTRIC AND MAGNETIC-FIELDS
    BROKMAN, A
    DOTHAN, F
    TULER, F
    MATERIALS SCIENCE AND ENGINEERING, 1979, 40 (02): : 261 - 263
  • [32] Glow-discharge treatment for the modification of textiles
    Fraunhofer-Inst. Grenzflachen B., Stuttgart, Germany
    Surf. Coat. Technol., 1-3 (1128-1131):
  • [33] Low pressure plasma arc source ion nitriding compared with glow-discharge plasma nitriding of stainless steel
    Wang, L
    Sun, JC
    Xu, XL
    SURFACE & COATINGS TECHNOLOGY, 2001, 145 (1-3): : 31 - 37
  • [34] Low pressure plasma arc source ion nitriding compared with glow-discharge plasma nitriding of stainless steel
    Liang, Wang
    Juncai, Sun
    Xiaolei, Xu
    2001, Elsevier (145) : 1 - 3
  • [35] Glow-discharge treatment for the modification of textiles
    Vohrer, U
    Muller, M
    Oehr, C
    SURFACE & COATINGS TECHNOLOGY, 1998, 98 (1-3): : 1128 - 1131
  • [36] ASSESSMENT OF THE EFFECTIVENESS OF 316L AUSTENITIC STEEL UNCONVENTIONAL GLOW DISCHARGE NITRIDING
    Fraczek, T.
    Kolmasiak, C.
    Olejnik, M.
    Skuza, Z.
    METALURGIJA, 2011, 50 (02): : 97 - 100
  • [37] SURFACE FLUORINATION IN GLOW-DISCHARGE
    YAGI, T
    PAVLATH, AE
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1982, 184 (SEP): : 34 - ORPL
  • [38] SURFACE MODIFICATION OF CHARCOAL BY GLOW-DISCHARGE - THE EFFECT ON BLOOD-CELLS
    HASIRCI, N
    JOURNAL OF APPLIED POLYMER SCIENCE, 1987, 34 (07) : 2457 - 2468
  • [39] Electrochemical investigations of pitting corrosion resistance of glow-discharge nitrided austenitic stainless steel
    Jagielska-Wiaderek, Karina
    Bala, Henryk
    Rudnicki, Jacek
    OCHRONA PRZED KOROZJA, 2009, 52 (4-5): : 123 - 127
  • [40] Plasma-source ion implantation compared with glow-discharge plasma nitriding of stainless steel
    Günzel, R
    Betzl, M
    Alphonsa, I
    Ganguly, B
    John, PI
    Mukherjee, S
    SURFACE & COATINGS TECHNOLOGY, 1999, 112 (1-3): : 307 - 309
12345