Surface Modification of Austenitic Steel by Various Glow-Discharge Nitriding Methods

被引：8
|
作者：
Borowski, Tomasz [1 ]
Adamczyk-Cieslak, Boguslawa [1 ]
Brojanowska, Agnieszka [1 ]
Kulikowski, Krzysztof [1 ]
Wierzchon, Tadeusz [1 ]
机构：
[1] Warsaw Univ Technol, Fac Mat Sci & Engn, PL-02507 Warsaw, Poland
来源：
MATERIALS SCIENCE-MEDZIAGOTYRA | 2015年 / 21卷 / 03期
关键词：
glow-discharge nitriding; active screen; plasma and cathodic potential; DC and pulsating current; austenitic steel; CATHODIC CAGE; STAINLESS-STEEL; SCREEN; SAMPLE;
D O I：
10.5755/j01.ms.21.3.7404
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The article presents a characterisation of nitrided layers produced on austenitic X2CrNiMo17-12-2 (AISI 316L) stainless steel in the course of glow-discharge nitriding at cathodic potential, at plasma potential, and at cathodic potential incorporating an active screen. All processes were carried out at 440 degrees C under DC glow-discharge conditions and in 100 kHz frequency pulsed current. The layers were examined in terms of their microstructure, phase and chemical composition, morphology, surface roughness, hardness, wear, and corrosion resistance. Studies have shown a strong influence of the type of nitriding method used and of the electrical conditions on the microstructure and properties of the diffusion layers formed.
引用
收藏
页码：376 / 381
页数：6
相关论文
共 50 条
  • [1] The Characteristic of Surface Layers on Austenitic Stainless Steel After Glow-discharge Nitriding Process
    Sitko, Artur
    Szkodo, Marek
    Gazda, Maria
    MECHATRONIC SYSTEMS AND MATERIALS: MATERIALS PRODUCTION TECHNOLOGIES, 2010, 165 : 165 - +
  • [2] Low temperature glow-discharge nitriding of a low nickel austenitic stainless steel
    Borgioli, F.
    Fossati, A.
    Matassini, G.
    Galvanetto, E.
    Bacci, T.
    SURFACE & COATINGS TECHNOLOGY, 2010, 204 (21-22): : 3410 - 3417
  • [3] Cavitation Erosion Resistance of Austenitic Stainless Steel after Glow-Discharge Nitriding Process
    Szkodo, Marek
    Sitko, Artur
    Gazda, Maria
    ENVIRONMENTAL DEGRADATION OF ENGINEERING & MATERIALS ENGINEERING AND TECHNOLOGIES, 2012, 183 : 201 - +
  • [4] Surface Modification of Austenitic Stainless Steel by Means of Low Pressure Glow-Discharge Treatments with Nitrogen
    Borgioli, Francesca
    Galvanetto, Emanuele
    Bacci, Tiberio
    COATINGS, 2019, 9 (10)
  • [5] Low temperature glow-discharge nitriding of austenitic stainless steels
    Borgioli, F.
    Galvanetto, E.
    Bacci, T.
    METALLURGIA ITALIANA, 2018, (10): : 32 - 42
  • [6] GLOW-DISCHARGE NITRIDING IN PRODUCTION
    JONES, CK
    STURGES, DJ
    MARTIN, SW
    METAL PROGRESS, 1973, 104 (07): : 62 - 63
  • [7] SURFACE HARDENING OF PISTON RINGS BY NITRIDING IN GLOW-DISCHARGE
    SOKOLOV, AD
    METAL SCIENCE AND HEAT TREATMENT, 1982, 24 (5-6) : 349 - 351
  • [8] ION NITRIDING OF ARMCO IRON IN VARIOUS GLOW-DISCHARGE REGIONS
    MICHALSKI, J
    SURFACE & COATINGS TECHNOLOGY, 1993, 59 (1-3): : 321 - 324
  • [9] Glow-discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment time
    Fossati, A
    Borgioli, F
    Galvanetto, E
    Bacci, T
    SURFACE & COATINGS TECHNOLOGY, 2006, 200 (11): : 3511 - 3517
  • [10] Glow-discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment temperature
    Borgioli, F
    Fossati, A
    Galvanetto, E
    Bacci, T
    SURFACE & COATINGS TECHNOLOGY, 2005, 200 (07): : 2474 - 2480
12345