Microstructural Features and Mechanical Properties of In Situ Formed ZrB2/Cu Composites

被引：36
|
作者：
Zhang, Zhiguo [1 ]
Sheng, Yinying [1 ]
Xu, Xiwei [1 ]
Li, Wei [1 ]
机构：
[1] Jinan Univ, Dept Mat Sci & Engn, Guangzhou 510632, Guangdong, Peoples R China
来源：
ADVANCED ENGINEERING MATERIALS | 2015年 / 17卷 / 09期
关键词：
COPPER MATRIX COMPOSITE; SLIDING WEAR BEHAVIOR; TITANIUM BORIDE; PARTICLES; NANO;
D O I：
10.1002/adem.201400532
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In situ reinforced copper matrix composites with improved mechanical properties are promising materials for various applications. In this work, an attempt has been made to explore the microstructural features and properties of in situ formed ZrB2/Cu composites using a liquid metallurgy route. XRD, SEM, XPS, and TEM analysis were used for micro-structural characterization. The results showed that ZrB2 particles could form through the reaction of Zr and B in molten Cu. The obtained composites consisted of hexagonal shaped ZrB2 and Cu(Zr) solid solution matrix. The in situ ZrB2/Cu composites exhibited improved microhardness. However, the electrical conductivity decreased with increasing weight fractions of ZrB2.
引用
收藏
页码：1338 / 1343
页数：6
相关论文
共 50 条
  • [41] FABRICATION AND MICROSTRUCTURAL EVALUATION OF ZRB2/ZRC/ZR COMPOSITES BY LIQUID INFILTRATION
    WOO, SK
    KIM, CH
    KANG, ES
    JOURNAL OF MATERIALS SCIENCE, 1994, 29 (20) : 5309 - 5315
  • [42] Effect of friction stir welding on microstructure, mechanical and wear properties of AA6061/ZrB2 in situ cast composites
    Dinaharan, I.
    Murugan, N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 543 : 257 - 266
  • [43] In situ synthesis and properties of Zr2Al3C4/ZrB2 composites
    Guo Qilong
    Yang Yahui
    Li Junguo
    Shen Qiang
    Zhang Lianmeng
    MATERIALS & DESIGN, 2011, 32 (8-9) : 4289 - 4294
  • [44] The effects of in-situ ZrB2 particles and Gd on the solidification behavior and mechanical properties of AA6111 matrix composites
    Huang, Luyao
    Zhao, Yutao
    Kai, Xizhou
    Cao, Rui
    Tao, Ran
    Qian, Wei
    Guan, Chuang
    Journal of Materials Research and Technology, 2021, 15 : 278 - 291
  • [45] Effect of SiC and TiC addition on microstructural and mechanical characteristics of microwave sintered ZrB2 based hybrid composites
    Sharma, Ankur
    Karunakar, D. B.
    CERAMICS INTERNATIONAL, 2021, 47 (18) : 26455 - 26464
  • [46] Microstructural evolution and mechanical properties of friction stir processed ZrB2/6061Al nanocomposites
    Zhang, Z. Y.
    Yang, R.
    Li, Y.
    Chen, G.
    Zhao, Y. T.
    Liu, M. P.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 762 : 312 - 318
  • [47] Structure and Properties of Laminated ZrB2/Ti and ZrB2/Al Composites with Nonrigid Interfaces under Dynamic Impact
    Gomorova, Yu. F.
    Kuznetsova, A. E.
    Buyakova, S. P.
    RUSSIAN PHYSICS JOURNAL, 2023, 66 (03) : 350 - 354
  • [48] Effects of ZrB2 on substructure and wear properties of laser melted in situ ZrB2p/6061Al composites
    Zeng, Yida
    Chao, Yuhjin
    Luo, Zhen
    Cai, Yangchuan
    Huang, Yongxian
    APPLIED SURFACE SCIENCE, 2016, 365 : 1 - 9
  • [49] Structure and Properties of Laminated ZrB2/Ti and ZrB2/Al Composites with Nonrigid Interfaces under Dynamic Impact
    Yu. F. Gomorova
    A. E. Kuznetsova
    S. P. Buyakova
    Russian Physics Journal, 2023, 66 : 350 - 354
  • [50] Microstructure and Mechanical Properties of C/(ZrB2–SiC) Composites Produced from Ceramic Ribbons
    A. V. Utkin
    V. E. Prokip
    D. A. Bannykh
    M. A. Golosov
    N. I. Baklanova
    Inorganic Materials, 2022, 58 : 183 - 189
12345