Experimental Study of Thermal Contact Conductance With Compensation Heater

被引：3
|
作者：
Wang, Zongren [1 ]
Zhang, Weifang [1 ]
Yang, Mingyuan [1 ]
机构：
[1] Beijing Univ Aeronaut & Astronaut, Sch Reliabil & Syst Engn, Beijing 100191, Peoples R China
来源：
MATERIALS PROCESSING TECHNOLOGY | 2011年 / 337卷
关键词：
thermal contact conductance (TCC); thermal contact resistance (TCR); compensation heater; aeroengine;
D O I：
10.4028/www.scientific.net/AMR.337.774
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This article describes an experimental setup to measure the TCC between interfaces of two contact solid materials. A new kind of design scheme of the compensation heater is put forward. An experimental investigation of thermal contact conductance is conducted with pressed pairs of GH4169 and K417 contacts in the range 130 similar to 280 degrees C. The results show that TCC over this condition increases with temperature, but it is not monotonic. Moreover, the thermal contact conductance measured by experiment with compensation heater at the interface is higher than that without compensation heater.
引用
收藏
页码：774 / 778
页数：5
相关论文
共 50 条
  • [21] Experimental Investigation of Thermal Contact Conductance: Variations of Surface Microhardness and Roughness
    Y. Z. Li
    C. V. Madhusudana
    E. Leonardi
    International Journal of Thermophysics, 1998, 19 : 1691 - 1704
  • [22] Thermal contact conductance estimation and experimental validation in hot stamping process
    Wang Chao
    Zhang YiSheng
    Tian XiaoWei
    Zhu Bin
    Li Jian
    SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2012, 55 (07) : 1852 - 1857
  • [23] Experimental investigation of thermal contact conductance across GFRP–GFRP joint
    Chang Ding
    Rongshun Wang
    Heat and Mass Transfer, 2015, 51 : 433 - 439
  • [24] Experimental investigation of the effect of metallic interstitial materials on thermal contact conductance
    Villanueva, E
    Madhusudana, C
    HEAT AND MASS TRANSFER AUSTRALASIA 1996, 1998, : 161 - 168
  • [25] Thermal contact conductance estimation and experimental validation in hot stamping process
    Chao Wang
    YiSheng Zhang
    XiaoWei Tian
    Bin Zhu
    Jian Li
    Science China Technological Sciences, 2012, 55 : 1852 - 1857
  • [26] Thermal contact conductance estimation and experimental validation in hot stamping process
    WANG ChaoZHANG YiSheng TIAN XiaoWeiZHU Bin LI Jian State Key Laboratory of Material Processing and Die and Mould TechnologyHuazhong University of Science TechnologyWuhan China
    Science China(Technological Sciences), 2012, 55 (07) : 1852 - 1857
  • [27] Thermal contact conductance estimation and experimental validation in hot stamping process
    WANG Chao
    Science China(Technological Sciences), 2012, (07) : 1852 - 1857
  • [28] An experimental investigation of thermal contact conductance of stainless steel at low temperatures
    Xu, RP
    Xu, L
    CRYOGENICS, 2005, 45 (10-11) : 694 - 704
  • [29] A NEW METHOD FOR MEASURING THERMAL CONTACT CONDUCTANCE EXPERIMENTAL TECHNIQUE AND RESULTS
    Woodland, Simon
    Crocombe, Andrew D.
    Chew, John W.
    Mills, Stephen J.
    PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 4, PTS A AND B, 2008, : 627 - 634
  • [30] Experimental Investigation of Thermal Contact Conductance in a Bundle of Flat Steel Bars
    Wyczolkowski, Rafal
    Bagdasaryan, Vazgen
    Gala, Marek
    APPLIED SCIENCES-BASEL, 2022, 12 (14):
12345