Cure kinetics and thermal stability of micro and nanostructured thermosetting blends of epoxy resin and epoxidized styrene-block-butadiene-block-styrene triblock copolymer systems

被引：21
|
作者：
George, Sajeev Martin [1 ]
Puglia, Debora [2 ]
Kenny, Jose M. [2 ]
Jyotishkumar, P. [1 ]
Thomas, Sabu [1 ,3 ]
机构：
[1] Mahatma Gandhi Univ, Sch Chem Sci, Kottayam 686560, Kerala, India
[2] Univ Perugia, Mat Engn Ctr, Terni, Italy
[3] Mahatma Gandhi Univ, Ctr Nanosci & Nanotechnol, Kottayam 686560, Kerala, India
来源：
POLYMER ENGINEERING AND SCIENCE | 2012年 / 52卷 / 11期
关键词：
PHASE-SEPARATION; MECHANICAL-PROPERTIES; MORPHOLOGY; DSC; BEHAVIOR;
D O I：
10.1002/pen.23183
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
The compatibility of styrene-block-butadiene-block-styrene (SBS) triblockcopolymer in epoxy resin is increased by the epoxidation of butadiene segment, using hydrogen peroxide in the presence of an in situ prepared catalyst in water/dichloroethane biphasic system. Highly epoxidized SBS (epoxy content SBS >26 mol%) give rise to nanostructured blends with epoxy resin. The cure kinetics of micro and nanostructured blends of epoxy resin [diglycidyl ether of bisphenol A; (DGEBA)]/amine curing agent [4,4'-diaminodiphenylmethane (DDM)] with epoxidized styrene-block-butadiene-block-styrene (eSBS 47 mol%) triblock copolymer has been studied for the first time using differential scanning calorimetry under isothermal conditions to determine the reaction kinetic parameters such as kinetic constants and activation energy. The cure reaction rate is decreased with increasing the concentration of eSBS in the blends and also with the lowering of cure temperature. The compatibility of eSBS in epoxy resin is investigated in detailed by Fourier transform infrared spectroscopy, optical and transmition electron microscopic analysis. The experimental data of the cure behavior for the systems, epoxy/DDM and epoxy/eSBS(47 mol%)/DDM show an autocatalytic behavior regardless of the presence of eSBS in agreement with Kamal's model. The thermal stability of cured resins is also evaluated using thermogravimetry in nitrogen atmosphere. POLYM. ENG. SCI., 2012. (C) 2012 Society of Plastics Engineers
引用
收藏
页码：2336 / 2347
页数：12
相关论文
共 22 条
  • [1] Morphological and Mechanical Characterization of Nanostructured Thermosets from Epoxy and Styrene-block-Butadiene-block-Styrene Triblock Copolymer
    George, Sajeev Martin
    Puglia, Debora
    Kenny, Jose M.
    Causin, Valerio
    Parameswaranpillai, Jyotishkumar
    Thomas, Sabu
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2013, 52 (26) : 9121 - 9129
  • [2] Micro- and macrophase separation of thermosetting systems modified with epoxidized styrene-block-butadiene-block-styrene linear triblock copolymers and their influence on final mechanical properties
    Ocando, Connie
    Tercjak, Agnieszka
    Serrano, Elena
    Ramos, Jose A.
    Corona-Galvan, Sergio
    Parellada, M. Dolores
    Fernandez-Berridi, M. Jose
    Mondragon, Inaki
    POLYMER INTERNATIONAL, 2008, 57 (12) : 1333 - 1342
  • [3] Nanostructured thermosetting systems from epoxidized styrene butadiene block copolymers
    Serrano, E
    Martin, AD
    Tercjak, A
    Pomposo, JA
    Mecerreyes, D
    Mondragon, I
    MACROMOLECULAR RAPID COMMUNICATIONS, 2005, 26 (12) : 982 - 985
  • [4] Reaction-Induced Phase Separation and Thermomechanical Properties in Epoxidized Styrene-block-butadiene-block-styrene Triblock Copolymer Modified Epoxy/DDM System
    George, Sajeev Martin
    Puglia, Debora
    Kenny, Jose M.
    Parameswaranpillai, Jyotishkumar
    Thomas, Sabu
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2014, 53 (17) : 6941 - 6950
  • [5] Volume shrinkage and rheological studies of epoxidised and unepoxidised poly(styrene-block-butadiene-block-styrene) triblock copolymer modified epoxy resin-diamino diphenyl methane nanostructured blend systems
    George, Sajeev Martin
    Puglia, Debora
    Kenny, Jose M.
    Parameswaranpillai, Jyotishkumar
    Vijayan, Poornima P.
    Pionteck, Juergen
    Thomas, Sabu
    PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 2015, 17 (19) : 12760 - 12770
  • [6] EFFECTS OF MICRODOMAIN STRUCTURES ON THE MOLECULAR-ORIENTATION OF POLY(STYRENE-BLOCK-BUTADIENE-BLOCK-STYRENE) TRIBLOCK COPOLYMER
    SAKURAI, S
    SAKAMOTO, J
    SHIBAYAMA, M
    NOMURA, S
    MACROMOLECULES, 1993, 26 (13) : 3351 - 3356
  • [7] MOLECULAR-ORIENTATION OF POLY(STYRENE-BLOCK-BUTADIENE-BLOCK-STYRENE) TRIBLOCK COPOLYMER WITH CYLINDRICAL MICRODOMAINS OF POLYSTYRENE
    SAKAMOTO, J
    SAKURAI, S
    DOI, K
    NOMURA, S
    POLYMER, 1993, 34 (23) : 4837 - 4840
  • [8] CURE KINETICS AND FINAL PERFORMANCE OF STYRENE BUTADIENE STYRENE BLOCK COPOLYMER/SILICA NANOCOMPOSITES
    Moaddab, Ahmad
    Kalaee, Mohammadreza
    Mazinani, Saeedeh
    Aghajani, Ali
    Rajab, Mohammad M.
    RUBBER CHEMISTRY AND TECHNOLOGY, 2015, 88 (01): : 53 - 64
  • [9] Epoxidation of Styrene/Butadiene Star Block Copolymer by Different Methods and Characterization of the Blends with Epoxy Resin
    Pandit, Rajesh
    Michler, Goerg H.
    Lach, Ralf
    Grellmann, Wolfgang
    Saiter, Jean Marc
    Berkessel, Albrecht
    Adhikari, Rameshwar
    MACROMOLECULAR SYMPOSIA, 2014, 341 (01) : 67 - 74
  • [10] Thermal dehydrochlorination of poly(vinyl chloride)-epoxidized butadiene/styrene triblock copolymer blends
    Meissner, W
    Zuchowska, D
    POLYMER DEGRADATION AND STABILITY, 1998, 60 (2-3) : 415 - 424
123