Morphology, structure and formation mechanism of silicide coating by pack cementation process

被引：27

作者：

Xiao Lai-rong ^{[1
]}

Cai Zhi-gang ^{[1
]}

Yi Dan-qing ^{[1
]}

Ying Lei ^{[1
]}

Liu Hui-qun ^{[1
]}

Huang Dao-yuan ^{[1
]}

机构：

[1] Cent S Univ, Sch Mat Sci & Engn, Changsha 410083, Peoples R China

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2006年 / 16卷

关键词：

niobium based alloy; pack cementation; silicide coating; formative mechanism;

D O I：

10.1016/S1003-6326(06)60182-9

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The MOSi2 coating on C103 niobium based alloy was prepared by pack cementation method. The formative mechanism, morphology and structure of coating were investigated. The silicide coating was formed by reactive diffusion obeying parabolic rule during pack cementation process. It is found that the composite structural coating is composed of three inferior layers as follows. The main layer is composed of MOSi2, the two phases' transitional layer consists of NbSi2 and a few Nb5Si3 and the diffuse layer is composed of Nb5Si3. The dense amorphous glass layer formed on the surface at high temperature oxidation circumstance can effectively prevent the diffusion of oxygen into coating.

引用

页码：S239 / S244

页数：6

共 50 条

[41] High temperature anti-oxidation mechanism of residual Si in SiC coating prepared by pack cementation
Yin, Ling
Guo, Shun
Zhang, Wuzhuang
Zeng, Yi
Xiong, Xiang
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2012, 29 (01): : 91 - 97
[42] Wear Behavior of Silicon-Cobalt Composite Coating Deposited on TiAl Alloy by Pack Cementation Process
Jin Tian
Conghui Zhang
Xuan Li
Sheng Lai
Wenling Xie
Wei Tian
Journal of Materials Engineering and Performance, 2022, 31 : 4811 - 4819
[43] Aluminide and silicide diffusion coatings by pack cementation for Nb-Ti-Al alloy
Chaia, N.
Cury, P. L.
Rodrigues, G.
Coelho, G. C.
Nunes, C. A.
SURFACE & COATINGS TECHNOLOGY, 2020, 389 (389):
[44] ALUMINIZATION BY PACK CEMENTATION PROCESS - STUDY OF PROCESSING VARIABLES
RAIRDEN, JR
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1973, 120 (08) : C232 - C232
[45] Oxidation-resistant coating for gamma titanium aluminides by pack cementation
Mabuchi, H
Tsuda, H
Kawakami, T
Nakamatsu, S
Matsui, T
Morii, K
SCRIPTA MATERIALIA, 1999, 41 (05) : 511 - 516
[46] Structure of Al-modified silicide coatings on an Nb-based ultrahigh temperature alloy prepared by pack cementation techniques
Tian, Xiaodong
Guo, Xiping
SURFACE & COATINGS TECHNOLOGY, 2009, 203 (09): : 1161 - 1166
[47] Oxidation Resistance Behavior of NiAl Coating on NiCrWbased Superalloy by Pack Cementation
Gao, Shan
Zou, Jianpeng
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2022, 51 (03): : 814 - 820
[48] Aluminide Coating prepared on Ni-base Superalloy by Pack Cementation
Zhou, Feng
Gao, Ming
Tu, Ganfeng
Liu, Kui
Pengu, Kew
ADVANCED RESEARCH ON ENERGY, CHEMISTRY AND MATERIALS APPLICATION, 2014, 848 : 11 - +
[49] Study on the preparation of the inner TiC coating made by pack cementation method
C/C Composites Technology Research Center, Northwestern Polytechnical University, Xi'an 710072, China
不详
Gongneng Cailiao, 2009, 9 (1588-1590):
[50] Structure and Performance Stability of Chromized Coatings by Pack Cementation
Wei, Chunbei
Lin, Songsheng
Dai, Mingjiang
Shi, Qian
Su, Yifan
Tang, Peng
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2021, 50 (05): : 1706 - 1712

← 1 2 3 4 5 →