Fabrication and mechanical properties of a 14Cr-ODS steel

被引：3

作者：

Hu, Helong ^{[1
]}

Zhou, Zhangjian ^{[1
]}

Liao, Lu ^{[1
]}

Wang, Man ^{[1
]}

Li, Shaofu ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China

来源：

12TH INTERNATIONAL SYMPOSIUM ON MULTISCALE, MULTIFUNCTIONAL AND FUNCTIONALLY GRADED MATERIALS (FGM 2012) | 2013年 / 419卷

关键词：

STRENGTHENED FERRITIC STEEL;

D O I：

10.1088/1742-6596/419/1/012029

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, the fabrication method and the mechanical properties of a 14Cr-ODS steel are investigated. The pre-alloyed steel powders and oxide powders were mechanical alloyed after milling for 30 h under a rotation of 300 rpm. Y-Ti-O phase was obtained after annealing the MA powders at 1100 degrees C . The tensile strength of the HIPed 14Cr-ODS steels at room temperature was about 1120 MPa. Microstructure observation showed that there were amount of nano dispersion particles in the base alloy which resulted in the high hardness and tensile strength.

引用

页数：5

共 50 条

[21] Effect of hot cross rolling on the microstructure and mechanical properties of an Fe-14Cr ODS ferritic steel
Macias-Delgado, J.
Leguey, T.
de Castro, V.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 711 : 448 - 459
[22] Influence of Powder Outgassing Conditions on the Chemical, Microstructural, and Mechanical Properties of a 14 wt% Cr Ferritic ODS Steel
Sornin, D.
Giroux, P. -F.
Rigal, E.
Fabregue, D.
Soulas, R.
Hamon, D.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (11): : 5559 - 5566
[23] Tensile properties and deformation mechanisms of a 14Cr ODS ferritic steel
Steckmeyer, A.
Praud, M.
Fournier, B.
Malaplate, J.
Garnier, J.
Bechade, J. L.
Tournie, I.
Tancray, A.
Bougault, A.
Bonnaillie, P.
JOURNAL OF NUCLEAR MATERIALS, 2010, 405 (02) : 95 - 100
[24] Preparation of Li4SiO4 Ceramics Tritium Breeder and Its Interface Corrosion Behavior with 14Cr-ODS Steel
Li, Guangbin
Wang, Man
Tan, Guangfan
Xiang, Maoqiao
Zhang, Yingchun
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2021, 50 (08): : 2663 - 2669
[25] Preparation of Li4SiO4 Ceramics Tritium Breeder and Its Interface Corrosion Behavior with 14Cr-ODS Steel
Li Guangbin
Wang Man
Tan Guangfan
Xiang Maoqiao
Zhang Yingchun
RARE METAL MATERIALS AND ENGINEERING, 2021, 50 (08) : 2663 - 2669
[26] Microstructure and mechanical properties of an ODS ferritic steel with very low Cr content
Cao, Shuguang
Zhou, Zhangjian
JOURNAL OF NUCLEAR MATERIALS, 2021, 551
[27] Mechanical properties and microstructure of 9Cr-ODS-CLF-1 steel
Yang, Shuang
Chen, Jiming
Fu, Haiying
Wang, Pinghuai
Zhou, Zhangjian
Zheng, Pengfei
FUSION ENGINEERING AND DESIGN, 2020, 151
[28] Influence of HIP pressure on tensile properties of a 14Cr ODS ferritic steel
Oksiuta, Z.
Ozieblo, A.
Perkowski, K.
Osuchowski, M.
Lewandowska, M.
FUSION ENGINEERING AND DESIGN, 2014, 89 (02) : 137 - 141
[29] Influence of the microstructure on the tensile and impact properties of a 14Cr ODS steel bar
Garcia-Junceda, A.
Hernandez-Mayoral, M.
Serrano, M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 556 : 696 - 703
[30] Annealing effect on the microstructure and magnetic properties of 14%Cr-ODS ferritic steel
Ding, H. L.
Gao, R.
Zhang, T.
Wang, X. P.
Fang, Q. F.
Liu, C. S.
FUSION ENGINEERING AND DESIGN, 2015, 100 : 371 - 377

← 1 2 3 4 5 →