Multiwall carbon nanotube/epoxy composites produced by a masterbatch process

被引：63

作者：

Wichmann, M. H. G. ^{[1
]}

Sumfleth, J. ^{[1
]}

Fiedler, B. ^{[1
]}

Gojny, F. H. ^{[1
]}

Schulte, K. ^{[1
]}

机构：

[1] Tech Univ Hamburg, Inst Polymer Composites, D-21073 Hamburg, Germany

来源：

MECHANICS OF COMPOSITE MATERIALS | 2006年 / 42卷 / 05期

关键词：

nanocomposites; production; epoxy matrix; carbon nanotubes; fracture toughness; electrical conductivity;

D O I：

10.1007/s11029-006-0050-3

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

A masterbatch process based on a minicalander (three-roller mill) and a vacuum dissolver was developed in order to produce multiwall carbon nanotube/epoxy composites with loading fractions of 0.5, 1.0, and 2.0 wt.%. TEM and SEM analyses were performed to investigate the dispersion results. A contrast imaging in the SEM backscattering mode revealed a homogeneous distribution of carbon nanotubes in the whole volume of the material. Furthermore, an interesting correlation was found to exist between the network structure formed by the nanotubes in the epoxy matrix and the appearance of fracture surface of the nanocomposites. Furthers more, the nanocomposites exhibited an electrical conductivity in the regime of some 10(-2) S/m.

引用

页码：395 / 406

页数：12

共 50 条

[21] Synthesis and properties of polypropylene/multiwall carbon nanotube composites
Koval'chuk, Anton A.
Shchegolikhin, Alexander N.
Shevchenko, Vitaliy G.
Nedorezova, Polina M.
Klyamkina, Alla N.
Aladyshev, Alexander M.
MACROMOLECULES, 2008, 41 (09) : 3149 - 3156
[22] Qualitative study on the effects of hydroxyl functionalized multiwall carbon nanotube and silica doped-epoxy composites
Yasaroglu, Inci
Aras, Omur
Kaya, Yunus
POLYMER COMPOSITES, 2022, 43 (03) : 1462 - 1475
[23] Effects of Processing Conditions on Rheological, Thermal, and Electrical Properties of Multiwall Carbon Nanotube/Epoxy Resin Composites
Ivanov, E.
Kotsilkova, R.
Krusteva, E.
Logakis, E.
Kyritsis, A.
Pissis, P.
Silvestre, C.
Duraccio, D.
Pezzuto, M.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2011, 49 (06) : 431 - 442
[24] Influence of the epoxy functionalization of multiwall carbon nanotubes on the nonisothermal cure kinetics and thermal properties of epoxy/multiwall carbon nanotube nanocomposites
Barghamadi, Mohamad
Behmadi, Hossein
POLYMER COMPOSITES, 2012, 33 (07) : 1085 - 1093
[25] Carbon nanotube functionalization effects on thermal properties of multiwall carbon nanotube/polycarbonate composites
El-Brolossy, Tarek A.
Ibrahim, Sobhy S.
Alkhudhayr, Eman A.
POLYMER COMPOSITES, 2015, 36 (07) : 1242 - 1248
[26] Short-beam shear of nanoprepreg/nanostitched three-dimensional carbon/epoxy multiwall carbon nanotube composites
Bilisik, Kadir
Karaduman, Nesrin
Sapanci, Erdal
JOURNAL OF COMPOSITE MATERIALS, 2020, 54 (03) : 311 - 329
[27] Graphene nanoplatelet, multiwall carbon nanotube, and hybrid multiwall carbon nanotube-graphene nanoplatelet epoxy nanocomposites as strain sensing coatings
Bragaglia, Mario
Paleari, Lorenzo
Lamastra, Francesca R.
Puglia, Debora
Fabbrocino, Francesco
Nanni, Francesca
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2021, 40 (17-18) : 632 - 643
[28] Interfacial effects in the electrical conductivity and viscous deformation of multiwall carbon nanotube-epoxy composites prepared by sonication
Brown, M.
Jagannadham, K.
JOURNAL OF COMPOSITE MATERIALS, 2013, 47 (27) : 3413 - 3420
[29] Chitosan particle/multiwall carbon nanotube composites by electrostatic interactions
Baek, Seung-Hoon
Kim, Bumsu
Suh, Kyung-Do
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2008, 316 (1-3) : 292 - 296
[30] Tunable dielectric properties in polyacrylonitrile/multiwall carbon nanotube composites
Palade, Stefania
Pantazi, Aida
Vulpe, Silviu
Berbecaru, Ciceron
Tucureanu, Viorica
Oprea, Ovidiu
Negrea, R. Florentina
Dragoman, Daniela
POLYMER COMPOSITES, 2017, 38 (08) : 1741 - 1748

← 1 2 3 4 5 →