Failure analysis of K-monel 500 (Ni-Cu-Al alloy) bolts

被引：11

作者：

Es-Said, OS ^{[1
]}

Zakharia, K ^{[1
]}

Zakharia, Z ^{[1
]}

Ventura, C ^{[1
]}

Pfost, D ^{[1
]}

Crawford, P ^{[1
]}

Ward, T ^{[1
]}

Raizk, D ^{[1
]}

Foyos, J ^{[1
]}

Marloth, R ^{[1
]}

机构：

[1] Loyola Marymount Univ, Dept Mech Engn, Los Angeles, CA 90045 USA

来源：

ENGINEERING FAILURE ANALYSIS | 2000年 / 7卷 / 05期

关键词：

age-hardening; grain growth; heat treatment; recrystallization;

D O I：

10.1016/S1350-6307(99)00031-X

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A bolt manufacturer used several subcontractors to fabricate K-monel 500 bolts. The completed bolts failed mechanical testing, and the manufacturer ascribed the failure to the bar stock. Testing contracted by the supplier of the bar stock showed that it met specifications. Metallographic testing described here shows that the bolts failed because of excessive grain growth and subsequent softening during heat treatment performed on the bolts after they were formed. Alternative heat treatments are discussed. (C) 2000 Elsevier Science Ltd. All rights reserved.

引用

页码：323 / 332

页数：10

共 50 条

[21] Experimental Research on Hot Working Property of Monel K-500 Alloy
Zhang, Xiaoping
Chen, Wenzhang
ADVANCES IN MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-4, 2013, 712-715 : 87 - +
[22] Corrosive Wear Performance of Monel K500 Alloy in Artificial Seawater
Chen Jun
Yan Fengyuan
TRIBOLOGY TRANSACTIONS, 2013, 56 (05) : 848 - 856
[23] Boronizing of Monel K500 alloy: Microstructural characterization and modeling of boron diffusion
Turkmen, Ilyas
Keddam, Mourad
MATERIALS CHARACTERIZATION, 2024, 213
[24] REFLECTIVITY AND COLORS OF TERNARY NI-CU-AL ALLOYS WITH B2 STRUCTURE
JACOBI, H
ZEITSCHRIFT FUR METALLKUNDE, 1971, 62 (09): : 653 - &
[25] Investigation of Ni-Al, Ni-Mg-Al and Ni-Cu-Al catalyst for hydrogen production from pyrolysis-gasification of polypropylene
Wu, Chunfei
Williams, Paul T.
APPLIED CATALYSIS B-ENVIRONMENTAL, 2009, 90 (1-2) : 147 - 156
[26] PRECIPITATION HARDENING IN NICKEL-COPPER BASE ALLOY MONEL K-500
DEY, GK
TEWARI, R
RAO, P
WADEKAR, SL
MUKHOPADHYAY, P
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1993, 24 (12): : 2709 - 2719
[27] Hydrogen production by thermocatalytic decomposition of methane over Ni-Al and Ni-Cu-Al catalysts:: Effect of calcination temperature
Echegoyen, Y.
Suelves, I.
Lazaro, M. J.
Moliner, R.
Palacios, J. M.
JOURNAL OF POWER SOURCES, 2007, 169 (01) : 150 - 157
[28] Renewable hydrogen production from steam reforming of glycerol by Ni-Cu-Al, Ni-Cu-Mg, Ni-Mg catalysts
Wang, Chao
Dou, Binlin
Chen, Haisheng
Song, Yongchen
Xu, Yujie
Du, Xu
Zhang, Liang
Luo, Tingting
Tan, Chunqing
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2013, 38 (09) : 3562 - 3571
[29] Microstructure and mechanical properties of a Monel K-500 alloy fabricated by directed energy deposition
Chen, Ze
Wang, Chengcheng
Tang, Chao
Lek, Yung Zhen
Kandukuri, Sastry Yagnanna
Du, Hejun
Gao, Huajian
Zhou, Kun
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 857
[30] Interdependence of nano grain size, alloying effects and magnetic properties of Ni-Cu-Al alloys
Karar, N.
Srivastava, A. K.
Kotnala, R. K.
INDIAN JOURNAL OF PURE & APPLIED PHYSICS, 2012, 50 (10) : 727 - 733

← 1 2 3 4 5 →