Stress corrosion cracking behavior of pipeline steel X60 in near-neutral pH soil environments around Shanghai

被引:0
|
作者
Li, G. F. [1 ]
Zhang, G. L. [1 ]
Huang, C. B. [1 ]
Yang, W. [1 ]
Sun, Z. H. [2 ]
Yan, D. F. [2 ]
Fang, J. H. [2 ]
机构
[1] Shanghai Res Inst Mat, Mat Corros Lab, 99 Handan Rd, Shanghai 200437, Peoples R China
[2] Shanghai Nat Gas Pipeline Network Co LTD, Shanghai 201204, Peoples R China
关键词
D O I
暂无
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Near-neutral pH stress corrosion cracking (SCC) behavior of pipeline steel X60 in typical soil environments around Shanghai has been investigated for structural integrity assessment. The effects of soil type and electrode potential from cathodic protection point were evaluated through slow strain rate tests (SSRT) at various electrode potentials in three solutions containing different typical soils. Results showed that the SCC susceptibility generally increased with decreasing electrode potential in all the three environments, with quick increase happening in the range of -1200 similar to -700mV(SCE). It is suggested that hydrogen induced cracking should dominate the SCC at low potentials. In cathodic potential range, the rank of the SCC susceptibility for soil type was Near-city soil > Cyan-purple soil > Cyan-yellow soil. In anodic potential range, SCC susceptibility curves mixed each other in the three solutions.
引用
收藏
页码:269 / +
页数:2
相关论文
共 50 条
  • [31] A review on current understanding of pipeline circumferential stress corrosion cracking in near-neutral PH environment
    Shirazi, Hamed
    Eadie, Reg
    Chen, Weixing
    ENGINEERING FAILURE ANALYSIS, 2023, 148
  • [32] Effect of plastic deformation on the electrochemical and stress corrosion cracking behavior of X70 steel in near-neutral pH environment
    Cui, Zhongyu
    Liu, Zhiyong
    Wang, Liwei
    Li, Xiaogang
    Du, Cuiwei
    Wang, Xin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 677 : 259 - 273
  • [33] Effect of Stress on Corrosion at Crack Tip on Pipeline Steel in a Near-Neutral pH Solution
    Yang, Yao
    Cheng, Y. Frank
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (11) : 4988 - 4995
  • [34] Corrosion of Welded X100 Pipeline Steel in a Near-Neutral pH Solution
    Zhang, C.
    Cheng, Y. F.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2010, 19 (06) : 834 - 840
  • [35] Surface Crack Growth Behavior of Pipeline Steel Under Disbonded Coating at Free Corrosion Potential in Near-Neutral pH Soil Environments
    Afolabi Egbewande
    Weixing Chen
    Reg Eadie
    Richard Kania
    Greg Van Boven
    Robert Worthingham
    Jenny Been
    Metallurgical and Materials Transactions A, 2014, 45 : 4946 - 4959
  • [36] Surface Crack Growth Behavior of Pipeline Steel Under Disbonded Coating at Free Corrosion Potential in Near-Neutral pH Soil Environments
    Egbewande, Afolabi
    Chen, Weixing
    Eadie, Reg
    Kania, Richard
    Van Boven, Greg
    Worthingham, Robert
    Been, Jenny
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (11): : 4946 - 4959
  • [37] Corrosion of Welded X100 Pipeline Steel in a Near-Neutral pH Solution
    C. Zhang
    Y. F. Cheng
    Journal of Materials Engineering and Performance, 2010, 19 : 834 - 840
  • [38] Combined Effect of Alternating Current Interference and Cathodic Protection on Pitting Corrosion and Stress Corrosion Cracking Behavior of X70 Pipeline Steel in Near-Neutral pH Environment
    Wang, Liwei
    Cheng, Lianjun
    Li, Junru
    Zhu, Zhifu
    Bai, Shuowei
    Cui, Zhongyu
    MATERIALS, 2018, 11 (04):
  • [39] STRESS-CORROSION CRACK INITIATION IN X-52 PIPELINE STEEL IN NEAR-NEUTRAL PH SOLUTION
    Fang, B.
    Eadie, R.
    Elboujdaini, M.
    PROCEEDINGS OF THE ASME INTERNATIONAL PIPELINE CONFERENCE 2010, VOL 1, 2010, : 347 - 356
  • [40] Near-Neutral pH Stress Corrosion Cracking Susceptibility of Plastically Prestrained X70 Steel Weldment
    Lu, Baotong
    Luo, Jing-Li
    Ivey, Douglas G.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (10): : 2538 - 2547