Fabrication of SiC Nanoparticles by Physical Milling for Ink-Jet Printing

被引：3

作者：

Kim, Jong-Woong ^{[1
]}

Shim, Jae-Shik ^{[1
]}

Maeng, Changjun ^{[1
,3
]}

Kim, Young-Sung ^{[2
]}

Ahn, Jinho ^{[3
]}

Kwak, Min-Gi ^{[1
]}

Hong, Sung-Jei ^{[1
]}

Cho, Hyun-Min ^{[1
]}

机构：

[1] Korea Elect Technol Inst, Display Components & Mat Res Ctr, Songnam, Gyeonggi Do, South Korea

[2] Seoul Natl Univ Sci & Technol, Sch NID Fus Technol, Seoul, South Korea

[3] Hanyang Univ, Div Engn & Mat Sci, Seoul 133791, South Korea

来源：

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY | 2013年 / 13卷 / 08期

关键词：

Silicon Carbide; Nanoparticle; Ink-Jet Printing; Mechanical Milling; Digital Printing;

D O I：

10.1166/jnn.2013.7062

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

Here we tried to show the possibility of mechanical milling method for fabrication of SiC nanoparticles and ink-jet printing method to make SIC patterns for use as several applications, e.g., micro hotplates. Planetary milling was employed to fabricate the nano-scale SIC particles from coarse powders. After 100 hours of milling, the size of the SiC particles decreased to about 100 nm, which was sufficient for the formulation of ink for ink-jet printing. The SIC particles were dispersed in an ink system consisted of ethylene glycol and ethanol with a small amount of additives. The ink with SiC nanoparticles could be successfully printed on an alumina substrate by the ink-jet printing method.

引用

页码：5586 / 5589

页数：4

共 50 条

[31] Ink-jet printing - Superhot dots
Fischetti, M
SCIENTIFIC AMERICAN, 2002, 287 (06) : 122 - 123
[32] Advances in ink-jet printing technology
Hardy, RE
COATING/PAPERMAKERS CONFERENCE, BOOKS 1 AND 2, 1998, : 231 - 233
[33] Ink-jet printing and sintering of PZT
Wang, TM
Derby, B
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2005, 88 (08) : 2053 - 2058
[34] Steamer breakthrough for ink-jet printing
不详
AATCC REVIEW, 2001, 1 (11) : 55 - 55
[35] Ink-jet printing of human cells
Saunders, R
Derby, B
Gough, J
Reis, N
ARCHITECTURE AND APPLICATION OF BIOMATERIALS AND BIOMOLECULAR MATERIALS, 2004, 1 : 95 - 97
[36] Influence of Ink Performance on Ink-Jet Printing Quality
Tian Haiying
Wei Xianfu
Huang Beiqing
RESEARCH ON FOOD PACKAGING TECHNOLOGY, 2014, 469 : 348 - +
[37] Fabrication of Ag nanoparticles/poly(3,4-etbylenedioxythiophene) nanocomposite electrodes by ink-jet printing
Lee, Joon Ho
Kim, Jin Heon
Kim, Tea-Heon
Seoul, Chang
Smart Nanotextiles, 2006, 920 : 43 - 48
[38] Modeling ink-penetration for ink-jet printing
Yang, L
Kruse, B
IS&T'S NIP17: INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES, 2001, : 731 - 734
[39] Controlling the thickness of the surface oxide layer on Cu nanoparticles for the fabrication of conductive structures by ink-jet printing
Jeong, Sunho
Woo, Kyoohee
Kim, Dongjo
Lim, Soonkwon
Kim, Jang Sub
Shin, Hyunjung
Xia, Younan
Moon, Jooho
ADVANCED FUNCTIONAL MATERIALS, 2008, 18 (05) : 679 - 686
[40] Photoluminescent nanoparticles in water with tunable emission for coating and ink-jet printing
Deng, Chao
Yang, Zhening
Zheng, Zhicheng
Liu, Na
Ling, Jun
JOURNAL OF MATERIALS CHEMISTRY C, 2015, 3 (15) : 3666 - 3675

← 1 2 3 4 5 →