Optimization of Machining Parameters of Hybrid Fiber Reinforced Polymer Composites using Design of Experiments

被引：0

作者：

Jagannatha, T. D. ^{[1
]}

Bhaskar, H. B. ^{[2
]}

Sheriff, Zahoor Ahmed ^{[1
]}

Irfan, G. ^{[3
]}

机构：

[1] HMS Inst Technol, Dept Mech Engn, Tumkur, Karnataka, India

[2] Sri Siddhartha Inst Technol, Dept Ind Engn & Management, Tumkur, Karnataka, India

[3] HMS Inst Technol, Tumkur, Karnataka, India

来源：

ADVANCES IN POLYMER COMPOSITES: MECHANICS, CHARACTERIZATION AND APPLICATIONS | 2019年 / 2057卷

关键词：

Epoxy; Drilling; Anova; Glass fiber; Carbon fiber; RESIDUAL MECHANICAL-BEHAVIOR; DRILLING DAMAGE; SURFACE-ROUGHNESS; GFRP COMPOSITES; THRUST FORCE; PART II; DELAMINATION; VIBRATION; STRENGTH; PLASTICS;

D O I：

10.1063/1.5085579

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

In the present investigation, the polymer hybrid composites were developed by varying the reinforcements from 15%, 30%, 45% and 60% of glass fiber and carbon fibers in 40% epoxy matrix under vacuum bag process. The composite is cured at room temperature and the post curing was done at 50 degrees C for 30 min, 65 degrees C for 45 min and 75 degrees C for 1 hour. The machinability characteristics like thrust force and delamination were determined during the drilling of glass and carbon fibers reinforced epoxy matrix hybrid composites using HSS, Titanium Coated and Carbide Tipped tools of 3 mm, 6 mm and 9 mm diameter drill bits were analyzed and a second order statistical model was developed using ANOVA for optimization of machining parameters.

引用

页数：11

共 50 条

[21] Optimization of Machining Parameters in Drilling of Glass/Hemp/Bamboo Fibres Based Hybrid Polymer Composites
Bijjam, Ramgopal Reddy
Chandanam, Srinivas
Nandipati, Govind
Dhoria, Sneha H.
ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 2022, 46 (03): : 127 - 133
[22] Optimization of Fabrication Parameters on Hybrid Fibre Reinforced Polymer Composite by ANN Design
Raj, Sonia S.
Pradeep, P.
Dhas, Edwin Raja J.
Gladson, D.
2019 INNOVATIONS IN POWER AND ADVANCED COMPUTING TECHNOLOGIES (I-PACT), 2019,
[23] Experimental investigation of mechanical and machining parameters of hybrid nanoclay glass fiber-reinforced polyester composites
P. Prabhu
S. Mohamed Iqbal
A. Balaji
B. Karthikeyan
Advanced Composites and Hybrid Materials, 2019, 2 : 93 - 101
[24] Experimental investigation of mechanical and machining parameters of hybrid nanoclay glass fiber-reinforced polyester composites
Prabhu, P.
Iqbal, S. Mohamed
Balaji, A.
Karthikeyan, B.
ADVANCED COMPOSITES AND HYBRID MATERIALS, 2019, 2 (01) : 93 - 101
[25] Modelling thermal effects in machining of carbon fiber reinforced polymer composites
Santiuste, C.
Diaz-Alvarez, J.
Soldani, X.
Miguelez, H.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2014, 33 (08) : 758 - 766
[26] Optimization and sensitivity analysis of drilling parameters for sustainable machining of carbon fiber-reinforced polypropylene composites
Mudhukrishnan, M.
Hariharan, P.
Palanikumar, K.
Latha, B.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2019, 32 (11) : 1485 - 1508
[27] Design parameter optimization of Jute-chicken fiber reinforced polymeric hybrid composites
Johri, Nitin
Mishra, Raghvendra
Thakur, Harishchandra
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 19862 - 19873
[28] OPTIMIZATION OF ELECTRICAL DISCHARGE MACHINING PARAMETERS OF ALUMINIUM HYBRID COMPOSITES USING TAGUCHI METHOD
Radhika, N.
Sudhamshu, A. R.
Chandran, G. Kishore
JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2014, 9 (04): : 502 - 512
[29] Optimization of machining parameters of Aluminium based hybrid composites using Gray Relation Analysis
Sahu, Kuldip Kumar
Ballav, Raj
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (09) : 9977 - 9981
[30] Optimal design of customised hip prosthesis using fiber reinforced polymer composites
Sridhar, I.
Adie, P. P.
Ghista, D. N.
MATERIALS & DESIGN, 2010, 31 (06) : 2767 - 2775

← 1 2 3 4 5 →