High temperature oxidation of Cr-Mo-V tool steel in carbon dioxide

被引：7

作者：

Chaliampalias, D. ^{[1
]}

Vourlias, G. ^{[1
]}

Pavlidou, E. ^{[1
]}

Chrissafis, K. ^{[1
]}

机构：

[1] Aristotle Univ Thessaloniki, GR-54006 Thessaloniki, Greece

来源：

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY | 2013年 / 113卷 / 03期

关键词：

Metals and Alloys; Microstructure; Scanning Electron Microscopy; Thermogravimetric measurements; ALLOYS; METAL;

D O I：

10.1007/s10973-013-2947-0

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This study aims to examine the oxidation resistance and kinetics of Cr, Mo, and V containing tool steel (Calmax) when exposed in CO2 high temperature environment by thermogravimetric measurements, X-ray diffraction analysis, and microscopic observation. The tool steel samples begin to oxidize at 480 A degrees C while over 600 A degrees C, the oxidation rate increases significantly. Finally, at 900 A degrees C, the oxidation rate is significantly high. The activation energy of the oxidation was calculated as 160.1 kJ mol(-1). Microscopically, the thickness of the scale was found to increase with the exposure temperature, and the as formed scales consisted of two distinguishable oxide layers.

引用

页码：1309 / 1315

页数：7

共 50 条

[41] EFFECT OF CREEP DAMAGE ON FATIGUE LIFE OF CR-MO-V STEEL
SHINYA, N
KYONO, J
KUSHIMA, H
YOKOI, S
TRANSACTIONS OF NATIONAL RESEARCH INSTITUTE FOR METALS, 1987, 29 (02): : 115 - 123
[42] Kinetics of plasma nitriding and renitriding of 3% Cr-Mo-V steel
E. Rolinski
D. Clubine
G. Sharp
F. LeClaire
D. Boyer
R. Notman
Journal of Materials Engineering and Performance, 2000, 9 : 457 - 462
[43] Effect of heat treatment parameters on mechanical properties of high strength Cr-Mo-V steel
Hui, WJ
Dong, H
Weng, YQ
Wang, MQ
Chen, SL
Shi, J
ACTA METALLURGICA SINICA, 2002, 38 (10) : 1009 - 1014
[44] Experimental Measurement of Residual Stresses in Cr-Mo-V Steel Restrained Welds with High Thickness
Maestri, N.
Marangoni, P.
Pettene, D.
Rivolta, B.
Gerosa, R.
MATERIALS PERFORMANCE AND CHARACTERIZATION, 2018, 7 (04) : 594 - 605
[45] Effect of nitrogen substituting carbon on high-temperature mechanical properties and wear performance of Cr-Mo-V hot-working die steel
Gu, Jinbo
Yin, Junwei
Chi, Hongxiao
Li, Lihao
Zhou, Jian
Ma, Dangshen
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 34 : 511 - 522
[46] Influence of Chemical Composition on the Structure, Hardness, and Toughness of High Alloyed Cr-Mo-V Steel
Todic, Aleksandar
Cikara, Dejan
Todic, Tomislav
Cikara-Anic, Deana
Minic, Dusko
MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (11) : 1193 - 1197
[47] EFFECT OF PRIOR AUSTENITE GRAIN-SIZE ON HIGH-TEMPERATURE CREEP-PROPERTIES OF A CR-MO-V STEEL
OHI, N
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S486 - S486
[48] EFFECT OF PRIOR AUSTENITE GRAIN-SIZE ON HIGH-TEMPERATURE CREEP-PROPERTIES OF A CR-MO-V STEEL
KIMURA, K
OHI, N
MATSUO, T
KIKUCHI, M
TANAKA, R
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1988, 74 (08): : 1641 - 1648
[49] CORRELATION OF HIGH-TEMPERATURE PROPERTIES AND STRUCTURES IN 1 CR-MO-V FORGING STEELS
GOLDHOFF, RM
BEATTIE, HJ
TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1965, 233 (09): : 1743 - &
[50] SURVIVAL OF CR-MO AND CR-MO-V LOW-ALLOYED STEEL-COMPONENTS AFTER LONG-DURATION HOLDING AT HIGH-TEMPERATURE
LEYMONIE, C
MEMOIRES ET ETUDES SCIENTIFIQUES DE LA REVUE DE METALLURGIE, 1986, 83 (01): : 5 - 14

← 1 2 3 4 5 →