Influence of tetragonality and secondary phase on the Curie temperature for barium titanate ceramics

被引：11

作者：

Tang, Bin ^{[1
]}

Zhang, Shu-Ren ^{[1
]}

Yuan, Ying ^{[1
]}

Yang, Lin-Bo ^{[1
]}

Zhou, Xiao-Hua ^{[1
]}

机构：

[1] Univ Elect Sci & Technol China, State Key Lab Elect Thin Films & Integrated Devic, Chengdu 610054, Peoples R China

来源：

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS | 2008年 / 19卷 / 11期

关键词：

D O I：

10.1007/s10854-007-9477-0

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The effects of tetragonality and secondary phase on the Curie point of barium titanate (BaTiO3) ceramics were investigated in BaTiO3-MnNb2O6 system using differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscope (SEM). In the case of MnNb2O6 addition up to 0.50 mol%, the Curie point decreased as the room temperature tetragonality decreased. With MnNb2O6 content greater than 1.00 mol%, a secondary phase Ba2Ti3Nb4O18 was formed, resulting in a shift of the Curie point towards higher temperatures. The chemical defect reaction and the internal stress effect on the Curie point have also been discussed.

引用

页码：1109 / 1113

页数：5

共 50 条

[21] Selective substitution and tetragonality by Co-doping of dysprosium and thulium on dielectric properties of barium titanate ceramics
Kim, Jungdae
Kim, Dowan
Kim, Jinseong
Kim, Yong-nam
Hui, K. N.
Lee, Heesoo
ELECTRONIC MATERIALS LETTERS, 2011, 7 (02) : 155 - 159
[22] Selective substitution and tetragonality by Co-doping of dysprosium and thulium on dielectric properties of barium titanate ceramics
Jungdae Kim
Dowan Kim
Jinseong Kim
Yong-nam Kim
K. N. Hui
Heesoo Lee
Electronic Materials Letters, 2011, 7 : 155 - 159
[23] The Measurement of Barium Titanate's Curie Temperature Based on Hysteresis Loop
Zhao, Chenlei
PROCEEDINGS OF THE 2015 4TH INTERNATIONAL CONFERENCE ON COMPUTER, MECHATRONICS, CONTROL AND ELECTRONIC ENGINEERING (ICCMCEE 2015), 2015, 37 : 1199 - 1202
[24] Influence of additives on electrical characteristics of barium titanate ceramics
Mitic, V.V.
Nikolic, Z.S.
Science of Sintering, 1994, 26 (02)
[25] Influence of Cr Valence State on Dielectric-Temperature Stability of Barium Titanate Ceramics
Lu, Da-Yong
Zhang, Li
Han, Dan-Dan
Wang, Yan-Dong
Yang, Xue
Sun, Xiu-Yun
MATERIAL SCIENCES AND TECHNOLOGY, PTS 1 & 2, 2012, 560-561 : 914 - 918
[26] SINTERING TEMPERATURE INFLUENCE ON PHASE-STABILITY IN BARIUM-TITANATE CERAMICS WITH VERY SMALL GRAIN-SIZE
DELCERRO, J
MUNDI, M
GALLARDO, C
CRIADO, JM
GOTOR, FJ
BHALLA, A
FERROELECTRICS, 1992, 127 (1-4) : 59 - 64
[27] FABRICATION OF HIGH-CURIE-POINT BARIUM-LEAD TITANATE PTCR CERAMICS
WANG, SH
HWANG, FS
TSENG, TY
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1990, 73 (09) : 2767 - 2770
[28] Piezoelectric properties of high Curie temperature barium titanate-bismuth perovskite-type oxide system ceramics
Wada, Satoshi
Yamato, Keisuke
Pulpan, Petr
Kumada, Nobuhiro
Lee, Bong-Yeon
Iijima, Takashi
Moriyoshi, Chikako
Kuroiwa, Yoshihiro
JOURNAL OF APPLIED PHYSICS, 2010, 108 (09)
[29] SUPER-HIGH FREQUENCY DISPERSION IN BARIUM TITANATE ABOVE CURIE TEMPERATURE
YAZYTSKI.BY
POPLAVKO, YM
SOVIET PHYSICS SOLID STATE,USSR, 1967, 8 (12): : 2906 - +
[30] Curie Temperature and Tunable Dielectric Properties of Barium Strontium Titanate Thick Films
Jeon, Sohyun
Kim, Insung
Min, Bokki
Song, Jaesung
Yoon, Jondo
JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2006, 43 (07) : 421 - 426

← 1 2 3 4 5 →