Characteristics of heat and water transfer through a porous plate

被引：5
|
作者：
Wang, Shixue [1 ]
Yue, Like [1 ]
Wang, Fei [1 ]
机构：
[1] Tianjin Univ, MOE Key Lab Efficient Utilizat Low & Medium Grade, Tianjin 300350, Peoples R China
来源：
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2018年 / 119卷
关键词：
Fuel cell; Self-humidifying; Porous plate; Heat and water transfer; Water recovery; POLYMER ELECTROLYTE MEMBRANE; PROTON-EXCHANGE MEMBRANE; MULTIPHASE MIXTURE MODEL; LIQUID-GAS FLOW; PEM FUEL-CELLS; MULTICOMPONENT TRANSPORT; PHASE-CHANGE; MEDIA; HUMIDIFICATION; CHANNEL;
D O I：
10.1016/j.ijheatmasstransfer.2017.11.082
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In this study, an experimental measurement system was established to examine the heat and water transfer process for a porous plate in the self-humidifying system of a fuel cell. The physical parameters of the fluid flow and porous plates were evaluated for their effects on the heat and water transfer characteristics of the porous plates. The results showed that using a countercurrent flow and increasing the inlet temperature and relative humidity of the humidifying gas can improve the heat transfer and water transmission on both sides of the porous plates. Meanwhile, using a countercurrent flow, increasing the inlet temperature of the humidifying gas, and decreasing the relative humidity can improve the water recovery rate. In addition, increasing the porosity of the porous medium can promote water transfer. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：295 / 302
页数：8
相关论文
共 50 条
  • [41] Numerical Simulation of Heat Transfer Characteristics of Dimpled Plate
    Ji, Changfa
    Liu, Xiaobing
    Liu, Rui
    PROGRESS IN CIVIL ENGINEERING, PTS 1-4, 2012, 170-173 : 2686 - 2692
  • [42] Condensation heat transfer correlation for water-ethanol vapor mixture flowing through a plate heat exchanger
    Weiqing Zhou
    Shenhua Hu
    Xiangrong Ma
    Feng Zhou
    Heat and Mass Transfer, 2018, 54 : 3025 - 3033
  • [43] Heat Transfer and Pressure Drop Characteristics of Nanofluids in a Plate Heat Exchanger
    Kwon, Y. H.
    Kim, D.
    Li, C. G.
    Lee, J. K.
    Hong, D. S.
    Lee, J. G.
    Lee, S. H.
    Cho, Y. H.
    Kim, S. H.
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2011, 11 (07) : 5769 - 5774
  • [44] Investigation of heat transfer characteristics in plate-fin heat sink
    Chen, Han-Taw
    Lai, Shih-Ting
    Haung, Li-Ying
    APPLIED THERMAL ENGINEERING, 2013, 50 (01) : 352 - 360
  • [45] Experimental research on heat transfer characteristics of Dimple plate heat exchanger
    Ji Changfa
    Wu Liangliang
    Li Jiawei
    Wang Xiaoxia
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON ADVANCED DESIGN AND MANUFACTURING ENGINEERING, 2015, 39 : 979 - 983
  • [46] Flow maldistribution and heat transfer characteristics in plate and shell heat exchangers
    Beckedorff, L.
    da Silva, R.P.P.
    Martins, G.S.M.
    de Paiva, K.V.
    Oliveira, J.L.G.
    Oliveira, A.A.M.
    International Journal of Heat and Mass Transfer, 2022, 195
  • [47] Flow maldistribution and heat transfer characteristics in plate and shell heat exchangers
    Beckedorff, L.
    da Silva, R. P. P.
    Martins, G. S. M.
    de Paiva, K., V
    Oliveira, J. L. G.
    Oliveira, A. A. M.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 195
  • [48] Heat transfer and flow characteristics of a new type plate heat exchanger
    Nie, Ze-Sen
    Bi, Qin-Cheng
    Gao, Bin
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2014, 35 (10): : 2041 - 2044
  • [49] Phase Change and Heat Transfer Characteristics of a Corrugated Plate Heat Exchanger
    Su, Huashan
    Hu, Chaoqun
    Gao, Zhenjun
    Hu, Tao
    Wang, Gang
    Yu, Wan
    PROCESSES, 2020, 8 (01)
  • [50] Heat transfer through the copper plate of slab moulds
    Ölmann, U
    Schwerdtfeger, K
    STEEL RESEARCH INTERNATIONAL, 2006, 77 (03) : 186 - 193
12345