Tyre rolling kinematics and prediction of tyre forces and moments: part I - theory and method

被引：13

作者：

Oertel, Christian ^{[1
]}

Wei, Yintao ^{[2
]}

机构：

[1] FH Brandenburg, FB Tech Mechatron, D-14737 Brandenburg, Germany

[2] Tsinghua Univ, State Key Lab Automot Safety & Energy, Dept Automot Engn, Beijing 10084, Peoples R China

来源：

VEHICLE SYSTEM DYNAMICS | 2012年 / 50卷 / 11期

基金：

美国国家科学基金会;

关键词：

FEM; rolling contact; tyre forces and moments; steady-state kinematics; ply steering; ply camber; VEHICLE DYNAMIC SIMULATIONS; ANALYTICAL-MODEL; PNEUMATIC TIRES; CONTACT; FRICTION;

D O I：

10.1080/00423114.2012.694452

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A new method to describe tyre rolling kinematics and how to calculate tyre forces and moments is presented. The Lagrange-Euler method is used to calculate the velocity and contact deformation of a tyre structure under large deformation. The calculation of structure deformation is based on the Lagrange method, while the Euler method is used to analyse the deformation and forces in the contact area. The method to predict tyre forces and moments is built using kinematic theory and nonlinear finite element analysis. A detailed analysis of the tyre tangential contact velocity and the relationships between contact forces, contact areas, lateral forces, and yaw and camber angles has been performed for specific tyres. Research on the parametric sensitivity of tyre lateral forces and self-aligning torque on tread stiffness and friction coefficients is carried out in the second part of this paper.

引用

页码：1673 / 1687

页数：15

共 50 条

[21] Substructuring method and eigenfunction representation for a rolling tyre coupled to a secondary mechanical system
Michelin Americas Research Corp, Greenville, United States
Proc Inst Mech Eng Part D J Automob Eng, 4 (313-325):
[22] Horn amplification at a tyre/road interface - Part II: Ray theory and experiment
Kuo, CY
Graf, RAG
Dowling, AP
Graham, WR
INTER-NOISE 99: PROCEEDINGS OF THE 1999 INTERNATIONAL CONGRESS ON NOISE CONTROL ENGINEERING, VOLS 1-3, 1999, : 125 - 130
[23] Prediction of vehicle stability using a 'back to back' tyre test method
Cole, DJ
Khoo, YH
INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2001, 26 (05) : 573 - 582
[24] Evaluation Method of Rolling Bearing Quality (Part I : Theory)
Xia, Xintao
Liu, Bin
Chang, Zhen
Li, Yunfei
Zhu, Wenhuan
PROCEEDINGS OF THE 2016 INTERNATIONAL CONFERENCE ON SENSOR NETWORK AND COMPUTER ENGINEERING, 2016, 68 : 188 - 191
[25] Method of Calculating the Forces and Moments in the Process of Section Rolling.
Pietrzyk, Maciej
Glowacki, Miroslaw
Hutnik Warszawa, 1981, 48 (8-9): : 380 - 383
[26] MPSO DESIGN: PART I - WAVE EXCITATION FORCES AND MOMENTS
Vieira, Daniel R.
Malta, Edgard B.
Watai, Rafael A.
Goncalves, Rodolfo T.
Fujarra, Andre L. C.
Nishimoto, Kazuo
Oliveira, Allan C.
PROCEEDINGS OF THE ASME 31ST INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARTIC ENGINEERING, VOL 1, 2012, : 707 - 716
[27] Device and Measuring Method the Moments of Rolling Resistance Forces on the Contact Spot
Gilavdary, L.
Mekid, S.
Riznookaya, N.
DEVICES AND METHODS OF MEASUREMENTS, 2019, 10 (04): : 308 - 321
[28] Development of a 3-D quasi-static tyre model for on-road and off-road vehicle dynamics simulations: Part i-on-road flexible tyre model
Chan, Brendan J.
Sandu, Corina
International Journal of Vehicle Systems Modelling and Testing, 2014, 9 (01) : 77 - 105
[29] The Hohenheim Tyre Model: A validated approach for the simulation of high volume tyres - Part I: Model structure and parameterisation
Witzel, Paul
JOURNAL OF TERRAMECHANICS, 2018, 75 : 3 - 14
[30] Research on Quality Reliability of Rolling Bearing by Multi - weight Method (Part I : Theory)
Xia, Xintao
Liu, Bin
Chen, Xiangfeng
Zhu, Wenhuan
PROCEEDINGS OF THE 2016 6TH INTERNATIONAL CONFERENCE ON MECHATRONICS, COMPUTER AND EDUCATION INFORMATIONIZATION (MCEI 2016), 2016, 130 : 634 - 639

← 1 2 3 4 5 →