Effect of mechanical perforation on the press-forming process of paperboard

被引:9
|
作者
Leminen, Ville [1 ]
Tanninen, Panu [1 ]
Pesonen, Antti [1 ]
Varis, Juha [1 ]
机构
[1] LUT Univ, Yliopistonkatu 34, FI-53850 Lappeenranta, Finland
来源
29TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING (FAIM 2019): BEYOND INDUSTRY 4.0: INDUSTRIAL ADVANCES, ENGINEERING EDUCATION AND INTELLIGENT MANUFACTURING | 2019年 / 38卷
关键词
press forming; paperboard; perforation; design; FORCE;
D O I
10.1016/j.promfg.2020.01.148
中图分类号
TP18 [人工智能理论];
学科分类号
081104 ; 0812 ; 0835 ; 1405 ;
摘要
Press-forming is a process which is used to manufacture three-dimensional containers, such as trays and plates from paperboard. The forming is done from a pre-creased blank which is drawn into shape with a mould set consisting of a punch, die and a blank holder. Due to subsequent processes the air permeability of the formed material sometimes needs to be manipulated. However, such manipulation can in addition influence the mechanical performance of the materials, which has not been previously investigated. Mechanical perforation of multi-layer paperboard tray blanks with different perforation patterns was done to change the air permeability of the material. The air permeability and the tensile strength of the perforated materials were measured to analyse the effect of different patterns. The samples were analysed using a wide area 3D measurement system. After this, the perforated blanks were press formed to investigate the three-dimensional formability and the functionality of the materials in the manufacturing process. The results show a clear impact on the air permeability and the strength of the paperboard in tensile test and forming processes. Based on the results, suggestions for perforation patterns to maximize the functionality of the materials in the manufacturing processes are presented. (C) 2019 The Authors. Published by Elsevier B.V.
引用
收藏
页码:1402 / 1408
页数:7
相关论文
共 50 条
  • [31] Effects of pre-coating and press-forming conditions on press formability of aluminum-alloy sheets
    Sudo, M
    Iwase, T
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2001, : 281 - 286
  • [32] Foam-laid extensible paper for improved extensibility and press-forming performance
    Kouko, Jarmo
    Tanninen, Panu
    Leminen, Ville
    Barbier, Christophe
    Karlsson, Christopher
    Pesonen, Antti
    Hjelt, Tuomo
    CELLULOSE, 2024, 31 (11) : 6955 - 6973
  • [33] DEVELOPMENT OF FUZZY INFERENCE SYSTEM WITH LEARNING ALGORITHM FOR DETERMINING PRESS-FORMING CONDITIONS
    Yoshihara, S.
    Takahashi, A.
    Saito, M.
    MacDonald, B. J.
    Manabe, K.
    PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2010, VOL 1, 2011, : 561 - 566
  • [34] PEELING OF COATED METAL DUE TO SEVERE PRESS-FORMING IN ALUMINIZED STEEL SHEET
    KAWASE, H
    TAKEZOE, A
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1982, 22 (05) : 371 - 376
  • [35] STUDIES ON PRESS-FORMING OF ALUMINUM ALLOYS UNDER COEXISTING STATE OF LIQUID AND SOLID - 1. MECHANICAL PROPERTIES OF PRESS-FORMED ALUMINUM ALLOYS.
    Asaeda, Toshio
    Yoshikawa, Masanori
    Tuda, Hideaki
    Bulletin of the JSME, 1977, 20 (142): : 489 - 495
  • [36] Surface Fracture Prevention in Paperboard Press Forming with Advanced Force Control
    Tanninen, Panu
    Leminen, Ville
    Pesonen, Antti
    Matthews, Sami
    Varis, Juha
    23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING, 2020, 47 : 80 - 84
  • [37] Combined effect of blank holding force and forming force on the quality of press-formed paperboard trays
    Leminen, Ville
    Matthews, Sami
    Pesonen, Antti
    Tanninen, Panu
    Varis, Juha
    28TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING (FAIM2018): GLOBAL INTEGRATION OF INTELLIGENT MANUFACTURING AND SMART INDUSTRY FOR GOOD OF HUMANITY, 2018, 17 : 1120 - 1127
  • [38] Press-forming of aluminum foam and estimation of its mechanical properties from X-ray CT images using machine learning
    Hangai, Yoshihiko
    Sakaguchi, Yuki
    Okada, Kenji
    Tanaka, Yuuki
    MATERIALS CHARACTERIZATION, 2025, 221
  • [39] Effects of press-forming conditions and coating structure on flaking phenomenon in galvannealed steel sheets
    Urai, Masaaki
    Iwaya, Jiro
    Iwai, Masatoshi
    Arimura, Mitsushi
    R and D: Research and Development Kobe Steel Engineering Reports, 1997, 47 (02): : 29 - 32
  • [40] IMPROVEMENTS IN PRESS-FORMING PROPERTIES OF ALUMINIUM-MAGNESIUM ALLOY SHEET BY USE OF A RECOVERY ANNEAL
    WRIGHT, JC
    GREEN, D
    LONG, G
    JOURNAL OF THE INSTITUTE OF METALS, 1963, 91 (10): : 321 - &