Innovative fabrication of porous titanium coating on titanium by cold spraying and vacuum sintering

被引：56
|
作者：
Sun, Jifeng [1 ]
Han, Yong [1 ]
Cui, Kai [1 ]
机构：
[1] Xian Jiaotong Univ, State Key Lab Mech Behavior Mat, Xian 710049, Peoples R China
来源：
MATERIALS LETTERS | 2008年 / 62卷 / 21-22期
关键词：
porous titanium coating; cold spray; bond strength; structure; mechanical properties;
D O I：
10.1016/j.matlet.2008.04.011
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A porous titanium coating on titanium is fabricated by cold spraying "Mg+Ti" powders followed by vacuum sintering. The porous coating is interconnected, possesses the porosity of 48.6% with pore sizes in the range of 70-150 mu m, and firmly bonds to titanium substrate with a bond strength higher than 42 MPa. The bending Young's modulus and bending strength of the porous coating are 14.47 +/- 1.21 GPa and 106.93 +/- 10.79 MPa, respectively. The compressive Young's modulus and compressive yield strength of the porous coating are 3.99 +/- 0.12 GPa and 178.66 +/- 13.20 MPai, respectively. The porous titanium coating has sufficient strength and matched Young's modulus with nature natural bone for clinical use under load bearing conditions. (c) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码：3623 / 3625
页数：3
相关论文
共 50 条
  • [41] Effect of cold spray deposition of a titanium coating on fatigue behavior of a titanium alloy
    Price, T. S.
    Shipway, P. H.
    McCartney, D. G.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2006, 15 (04) : 507 - 512
  • [42] Cold compaction and sintering of titanium and its alloys for near-net-shape or preform fabrication
    Qian, Ma
    International Journal of Powder Metallurgy (Princeton, New Jersey), 2010, 46 (05): : 29 - 44
  • [43] Study on Grinding of Titanium Alloy with Electrostatic Spraying Coating Wheel
    Wang Xiaowei
    Huo Wenguo
    Cai Lanrong
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON INFORMATION ENGINEERING FOR MECHANICS AND MATERIALS, 2015, 21 : 1267 - 1271
  • [44] Characterization of CaP coating deposited on porous titanium
    De Medeiros, Waléria Silva
    Pereira, Luiz Carlos
    Pereira, Robson Pacheco
    De Oliveira, Marize Varella
    Key Engineering Materials, 2009, 396-398 : 307 - 310
  • [45] Preparation of biomedical coating on porous titanium alloy
    Shao, Huiping
    Wei, Ran
    Lin, Tao
    ADVANCES IN CHEMICAL, MATERIAL AND METALLURGICAL ENGINEERING, PTS 1-5, 2013, 634-638 : 2989 - 2992
  • [46] Use of Spark Plasma Sintering for Fabrication of Porous Titanium Aluminide Alloys from Elemental Powders
    Du, H.
    Liu, X. W.
    Li, J.
    Tao, P.
    Jiang, J.
    Sun, R.
    Fan, Z. T.
    MATERIALS AND MANUFACTURING PROCESSES, 2016, 31 (06) : 725 - 732
  • [47] SURFACE PREPARATION OF TITANIUM FOR VACUUM PLASMA SPRAYING AND ITS EFFECT ON SUBSTRATE/COATING INTERFACIAL FRACTURE-TOUGHNESS
    HOWARD, SJ
    CLYNE, TW
    COMPOSITES, 1993, 24 (08): : 603 - 610
  • [48] Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing
    MacDonald, D.
    Fernandez, R.
    Delloro, F.
    Jodoin, B.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2017, 26 (04) : 598 - 609
  • [49] Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing
    D. MacDonald
    R. Fernández
    F. Delloro
    B. Jodoin
    Journal of Thermal Spray Technology, 2017, 26 : 598 - 609
  • [50] Cold spraying of titanium: A review of bonding mechanisms, microstructure and properties
    Hussain, T.
    Key Engineering Materials, 2013, 533 : 53 - 90
12345