EVALUATION OF THE EFFECTIVENESS OF THE MICROCELLULAR EXTRUSION PROCESS OF LOW DENSITY POLYETHYLENE

被引：0
|
作者：
Tor-Swiatek, Aneta [1 ]
机构：
[1] Lublin Univ Technol, Fac Mech Engn, Dept Polymer Proc, PL-20618 Lublin, Poland
来源：
EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY | 2013年 / 15卷 / 03期
关键词：
microcellular extrusion process; effectiveness of process; low density polyethylene; blowing agent; microspheres;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
From a processing point of view, evaluation of effectiveness is essential for the proper conduct of each polymer processing process. However, it is particularly important in the case of modified plastics processing aids, such as blowing agents, the addition of which causes changes in both the process course and the physical properties and structure of the resulting product. Carrying out a proper analysis of the efficiency of the process, taking into account the criteria and methods can efficiently and reliably carry out a extrusion process. This paper presents the results of assessing the effectiveness of the microcellular extrusion process of LDPE modified with selected microblowing agent in the form of microspheres.
引用
收藏
页码：225 / 229
页数：5
相关论文
共 50 条
  • [31] INFLUENCE OF LOW-DENSITY POLYETHYLENE QUALITY ON EXTRUSION COATING PROCESSABILITY
    HONKANEN, A
    BERGSTROM, C
    LAIHO, E
    POLYMER ENGINEERING AND SCIENCE, 1978, 18 (13): : 985 - 989
  • [32] RADICAL REACTIONS OCCURRING IN LOW-DENSITY POLYETHYLENE DURING EXTRUSION
    LAVRUSHIN, FG
    GOLDBERG, VM
    AKUTIN, MS
    VASILENKO, VS
    PAVERMAN, NG
    DIKERMAN, DN
    VYSOKOMOLEKULYARNYE SOEDINENIYA SERIYA A, 1978, 20 (03): : 590 - 596
  • [33] SELECTING EXTRUSION TECHNOLOGY FOR LINEAR LOW-DENSITY POLYETHYLENE FILM
    VEAZEY, EW
    TAPPI JOURNAL, 1988, 71 (09): : 129 - 135
  • [34] ANALYSIS OF THE CAPILLARY EXTRUSION OF LOW-DENSITY POLYETHYLENE BY USING VELOCIMETRY
    Rodriguez-Gonzalez, F.
    Perez-Gonzalez, J.
    Marin-Santibanez, B. M.
    REVISTA MEXICANA DE INGENIERIA QUIMICA, 2011, 10 (03): : 401 - 408
  • [35] New silicone processing aids for the extrusion of linear low density polyethylene
    Pape, PG
    Hauenstein, DE
    Lupton, KE
    INTERNATIONAL CONFERENCE ON ADDITIVES FOR POLYOLEFINS, 1998, : 115 - 122
  • [36] Melt viscoelasticity of polyethylene terephthalate resins for low density extrusion foaming
    Xanthos, M., 2000, Soc Plast Eng, Brookfield, CT, United States (40):
  • [37] Reactive Extrusion Process for the Grafting of Maleic Anhydride onto Linear Low-Density Polyethylene with Ultraviolet Radiation
    Saade-Caballero, H.
    Martinez-Colunga, J. G.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 113 (05) : 3125 - 3129
  • [38] Reactive extrusion process for the grafting of maleic anhydride onto linear low-density polyethylene with ultraviolet radiation
    Saade-Caballero, H.
    Martínez-Colunga, J.G.
    Journal of Applied Polymer Science, 2009, 113 (05): : 3125 - 3129
  • [39] Chemical modification of low density polyethylene through reactive extrusion: Part I: Process development and product characterization
    Nield, SA
    Tzoganakis, C
    Budman, HM
    ADVANCES IN POLYMER TECHNOLOGY, 2000, 19 (04) : 237 - 248
  • [40] Thermal and morphological evaluation of very low density polyethylene/high density polyethylene blends
    Arnal, ML
    Cañizales, E
    Müller, AJ
    POLYMER ENGINEERING AND SCIENCE, 2002, 42 (10): : 2048 - 2063
12345