Characterization of Ultra-Thin Silicon Strip Detectors for Hadrontherapy Beam Monitoring

被引:0
|
作者
Bouterfa, Mohamed [1 ]
Aouadi, Khaled [1 ]
Flandre, Denis [1 ]
Gil, Eduardo Cortina
机构
[1] Univ Catholique Louvain UCL, Informat & Commun Technol Elect & Appl Math ICTEA, B-1348 Louvaine La Neuve, Belgium
关键词
Bio-medical instrumentation; Particle therapy; Silicon strip detector; Dosimetry; Beam monitoring;
D O I
暂无
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
For precise treatment purposes in hadrontherapy, the particle beam has to be monitored in real time without being degraded. For the first time, silicon strip detectors have been fabricated over an area as large as 4.5cm x 4.5cm with ultra low thickness of 20 microns in order to reduce the beam scattering. In this work, we briefly describe the fabrication process and characterize this novel detector consisting of 81 4cm-long strips. Fabrication was carried out in the cleanroom facilities of Universite catholique de Louvain starting from p-type thick-SOI wafers. A 62MeV proton beam similar to the ones in clinical treatments has been used to irradiate the sensor at Cyclotron Research Center, Louvain-la-Neuve. The considered parameters were dark current and signal strip repeatability, linearity versus dose rate, and response uniformity through the wafer. The fabrication process was successful and characterization gave satisfactory results. These novel fabricated devices constitute a very promising technology for future in-vivo, non-invasive verification of the actual treatment delivery in hadrontherapy.
引用
收藏
页码:1088 / 1091
页数:4
相关论文
共 50 条
  • [41] Fabrication of Ultra-thin Silicon PIN Detector
    Yu, Min
    Dong, Xianshan
    Li, Ying
    Tian, Dayu
    Wang, Jinyan
    Jin, Yufeng
    INTERNATIONAL SYMPOSIUM ON PHOTOELECTRONIC DETECTION AND IMAGING 2011: SENSOR AND MICROMACHINED OPTICAL DEVICE TECHNOLOGIES, 2011, 8191
  • [42] Fabrication of ultra-thin strained silicon on insulator
    T. S. Drake
    C. Ní Chléirigh
    M. L. Lee
    A. J. Pitera
    E. A. Fitzgerald
    D. A. Antoniadis
    D. H. Anjum
    J. Li
    R. Hull
    N. Klymko
    J. L. Hoyt
    Journal of Electronic Materials, 2003, 32 : 972 - 975
  • [43] Defect instability in ultra-thin oxides on silicon
    Xie, L
    Farmer, KR
    Buchanan, DA
    MICROELECTRONIC ENGINEERING, 1997, 36 (1-4) : 25 - 28
  • [44] Investigations of strength properties of ultra-thin silicon
    Schönfelder, S
    Bagdahn, J
    Ebert, M
    Petzold, M
    Bock, K
    Landesberger, C
    Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2005, : 105 - 111
  • [45] Monitoring of a Therapeutic Proton Beam: Preliminary Tests of Innovative Thin Silicon Detectors
    Vignati, A.
    Monaco, V.
    Attili, A.
    Cartiglia, N.
    Mazinani, M. Fadavi
    Giordanengo, S.
    Ali, O. Hammad
    Manganaro, L.
    Mazza, G.
    Sacchi, R.
    Staiano, A.
    Cirio, R.
    MEDICAL PHYSICS, 2017, 44 (06)
  • [46] THE PREPARATION AND CHARACTERIZATION OF ULTRA-THIN SILICON DIOXIDE FILMS ON A MO(110) SURFACE
    XU, XP
    GOODMAN, DW
    SURFACE SCIENCE, 1993, 282 (03) : 323 - 332
  • [47] Ultra-thin, and Flexible Physiological Monitoring System
    Charles, Harry K., Jr.
    Cain, Russell P.
    SAS 2009 - IEEE SENSORS APPLICATIONS SYMPOSIUM, PROCEEDINGS, 2009, : 200 - 205
  • [48] An experimental and numerical investigation on micro rolling for ultra-thin strip
    Xie, H. B.
    Manabe, K.
    Furushima, T.
    Tada, K.
    Jiang, Z. Y.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2016, 9 (03) : 405 - 412
  • [49] Design of high efficiency ITO phase/intensity modulator based on ultra-thin silicon strip waveguide
    Kuang, Yingxin
    Huang, Xingrui
    Jiang, Rui
    Guan, Huan
    Wei, Qingquan
    Han, Weihua
    Li, Zhiyong
    ELEVENTH INTERNATIONAL CONFERENCE ON INFORMATION OPTICS AND PHOTONICS (CIOP 2019), 2019, 11209
  • [50] An experimental and numerical investigation on micro rolling for ultra-thin strip
    H. B. Xie
    K. Manabe
    T. Furushima
    K. Tada
    Z. Y. Jiang
    International Journal of Material Forming, 2016, 9 : 405 - 412