Sliding friction and wear behavior of thermoplastic polyimide composites filled with differently surface-treated poly-p-phenylenebenzobisoxazole fibers

被引：1
|
作者：
Yu, Liang [1 ]
Cheng, Xianhua [1 ,2 ]
机构：
[1] Shanghai Jiao Tong Univ, Sch Mech Engn, Shanghai 200240, Peoples R China
[2] Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou, Peoples R China
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY | 2012年 / 226卷 / J8期
关键词：
Friction and wear behavior; poly-p-phenylenebenzobisoxazole fibers; polyimide; surface treatment; X-ray photoelectron spectroscopy; ADHESION; LOAD; PBO;
D O I：
10.1177/1350650112438652
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Rare earth and coupling agent surface treatment methods were employed toward poly-p-phenylenebenzobisoxazole (PBO) fibers. X-ray photoelectron spectroscopy measurement was used to analyze the surface characteristics of untreated and treated PBO fibers. The friction and wear behavior of the thermoplastic polyimide (PI) composites filled with differently surface-treated PBO fibers, sliding against GCr15 steel under oil-lubricated condition, was investigated on a reciprocating ball-on-block UMT-2MT tribometer. Scanning electron microscope investigation of worn surface morphologies of PBO/PI composites showed that rare earth treatment was more effective than coupling agent treatment to improve the friction and wear behavior of PBO/PI composites under given load and reciprocating sliding frequency. The mechanism of the friction and wear behavior of PBO/PI composites was discussed.
引用
收藏
页码：697 / 704
页数：8
相关论文
共 41 条
  • [31] FRICTION AND DRY SLIDING WEAR BEHAVIOR OF RED MUD FILLED BANANA FIBRE REINFORCED UNSATURATED POLYESTER COMPOSITES USING TAGUCHI APPROACH
    Prabu, V. Arumuga
    Manikandan, V.
    Uthayakumar, M.
    MATERIALS PHYSICS AND MECHANICS, 2012, 15 (01): : 34 - 45
  • [32] Sliding wear behavior of AZ91/B4C surface composites produced by friction stir processing
    Patle, Hemendra
    Sunil, B. Ratna
    Dumpala, Ravikumar
    MATERIALS RESEARCH EXPRESS, 2020, 7 (01)
  • [33] Microstructure and sliding wear behavior of fly ash reinforced dual phase brass surface composites synthesized through friction stir processing
    Dinaharan, I.
    Karpagarajan, S.
    Palanivel, R.
    Selvam, J. David Raja
    MATERIALS CHEMISTRY AND PHYSICS, 2021, 263
  • [34] Tribological behavior of poly (phenyl p-hydroxybenzoate)/polytetrafluoroethylene composites filled with hexagonal boron nitride under dry sliding condition
    Wang, Shibo
    Li, Qian
    Zhang, Sha
    Pan, Li
    MATERIALS & DESIGN, 2013, 43 : 507 - 512
  • [35] Effect of load and sliding speed on friction and wear behavior of silver/h-BN containing Ni-base P/M composites
    Tyagi, Rajnesh
    Xiong, Dangsheng
    Li, Jianliang
    WEAR, 2011, 270 (7-8) : 423 - 430
  • [36] Poly(ether ether ketone) Composites Reinforced by Short Carbon Fibers and Zirconium Dioxide Nanoparticles: Mechanical Properties and Sliding Wear Behavior with Water Lubrication
    Zhong, Y. J.
    Xie, G. Y.
    Sui, G. X.
    Yang, R.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 119 (03) : 1711 - 1720
  • [37] Microstructure, Mechanical and Sliding Wear Behavior of AA5083-B4C/SiC/TiC Surface Composites Fabricated Using Friction Stir Processing
    Jain, Vikram Kumar S.
    Muhammed, P. M.
    Muthukumaran, S.
    Babu, S. P. Kumaresh
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (06) : 1519 - 1529
  • [38] Microstructure, Mechanical and Sliding Wear Behavior of AA5083–B4C/SiC/TiC Surface Composites Fabricated Using Friction Stir Processing
    Vikram Kumar S. Jain
    P. M. Muhammed
    S. Muthukumaran
    S. P. Kumaresh Babu
    Transactions of the Indian Institute of Metals, 2018, 71 : 1519 - 1529
  • [39] Comparative Evaluation of Tribological Effectiveness of Carbon- and Glass-Filled Polyamide Composites Using Submicromechanical Diagnostics of Surface Layers before and after Wear Tests during Dry Sliding Friction
    M. Pashechko
    S. Shil’ko
    M. Czerniec
    Ya. Borc
    A. Prus
    Journal of Friction and Wear, 2023, 44 : 313 - 319
  • [40] Comparative Evaluation of Tribological Effectiveness of Carbon- and Glass-Filled Polyamide Composites Using Submicromechanical Diagnostics of Surface Layers before and after Wear Tests during Dry Sliding Friction
    Pashechko, M.
    Shil'ko, S.
    Czerniec, M.
    Borc, Ya.
    Prus, A.
    JOURNAL OF FRICTION AND WEAR, 2023, 44 (05) : 313 - 319
12345