Foaming behavior of poly(lactic acid) with different D-isomer content based on supercritical CO2-induced crystallization

Using supercritical carbon dioxide (sc-CO2) as a physical foaming agent, the effect of sc-CO(2)on the formation of crystalline domains and subsequently on the foaming behaviors of the two grades of PLA with different D-isomer content were investigated in a wide foaming temperature range. The PLA's final crystallinity is significantly increased with decreasing annealing temperature and by reducing the D-isomer content. Cellular structure results show that not only the crystallinity but also the crystalline morphology play an important role in cellular structure. A novel spherulite morphology including ringless and ring-banded morphology in the same spherulite was formed at lower foaming temperature, as a result, some entities were nonuniformly distributed in the PLA foams. Uniform and closed cellular structure were obtained when only the ring-banded spherulites were formed. An opened and interconnected cellular structure is tended to be formed because of the synergistic effect of high temperature and plasticization of CO2. Based on the crystallinity and morphology, a suitable foaming window as a function of temperature is proposed. It is found that PLA with 4.1% D-isomer content had much broader suitable foaming window range to produce homogeneous cellular structure.