Fabrication of Millimeter-Wave PTFE-Filled Waveguide Using SR Direct Etching

被引：0
|
作者：
Kishihara, Mitsuyoshi [1 ]
Ukita, Yoshiaki [2 ]
Yamamoto, Shigeaki [2 ]
Utsumi, Yuichi [2 ]
Ohta, Isao [3 ]
机构：
[1] Okayama Prefectural Univ, Fac Comp Sci & Syst Engn, Okayama 7191197, Japan
[2] Univ Hyogo, Lab Adv Sci & Technol Ind, Kobe, Hyogo 6500044, Japan
[3] Univ Hyogo, Sch Engn, Grad Sch Engn, Himeji, Hyogo 6712201, Japan
来源：
2007 ASIA PACIFIC MICROWAVE CONFERENCE, VOLS 1-5 | 2007年
基金：
日本学术振兴会;
关键词：
Millimeter-wave; Waveguide; SR etching; Waveguide bend; Microdevice;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A metallic waveguide is one of effective media guiding a millimeter- and submillimeter-wave because of the advantage of low loss. In this paper, trial fabrication of a PTFE-filled rectangular waveguide for millimeter-wave components is attempted with the use of the SR direct etching process, sputter deposition of metal, and electroplating. The fabrication procedure for the PTFE-filled waveguide is described and the measured frequency characteristics of the PM-filled waveguide mitered bends are shown.
引用
收藏
页码：1354 / +
页数：2
相关论文
共 50 条
  • [1] Fabrication of a PTFE-filled waveguide for millimeter-wave components using SR direct etching
    Kishihara, Mitsuyoshi
    Ukita, Yoshiaki
    Utsumi, Yuichi
    Ohta, Isao
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2008, 14 (9-11): : 1417 - 1422
  • [2] Fabrication of a PTFE-filled waveguide for millimeter-wave components using SR direct etching
    Mitsuyoshi Kishihara
    Yoshiaki Ukita
    Yuichi Utsumi
    Isao Ohta
    Microsystem Technologies, 2008, 14 : 1417 - 1422
  • [3] SR direct etching of PTFE and its application to millimeter-wave PTFE-filled waveguide
    Faculty of Computer Science and System Engineering, Okayama Prefectural University, 111 Kuboki, Soja-shi, Okayama, 719-1197, Japan
    不详
    不详
    不详
    IEEJ Trans. Electron. Inf. Syst., 2 (259-266+9):
  • [4] Fabrication of Integrated PTFE-Filled Waveguide Butler Matrix for Short Millimeter-Wave by SR Direct Etching
    Kishihara, Mitsuyoshi
    Takeuchi, Masaya
    Yamaguchi, Akinobu
    Utsumi, Yuichi
    Ohta, Isao
    IEICE TRANSACTIONS ON ELECTRONICS, 2018, E101C (06): : 416 - 422
  • [5] Fabrication of PTFE-Filled Waveguide Bandpass Filter Using SR Direct Etching
    Kishihara, M.
    Kato, M.
    Ikeuchi, H.
    Murai, K.
    Ukita, Y.
    Utsumi, Y.
    Kawai, T.
    Ohta, I.
    2010 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST (MTT), 2010, : 1724 - 1727
  • [6] Design and Fabrication of PTFE-Filled Waveguide Components by SR Direct Etching
    Kishihara, Mitsuyoshi
    Ikeuchi, Hiroaki
    Utsumi, Yuichi
    Kawai, Tadashi
    Ohta, Isao
    IEICE TRANSACTIONS ON ELECTRONICS, 2012, E95C (01) : 122 - 129
  • [7] Fabrication of 180 GHz PTFE-Filled Waveguide and Its Bandpass Filters by SR Direct Etching
    Kishihara, M.
    Sasaki, R.
    Yamamoto, T.
    Yamaguchi, A.
    Utsumi, Y.
    Ohta, I.
    2014 ASIA-PACIFIC MICROWAVE CONFERENCE (APMC), 2014, : 49 - 51
  • [8] Trial Fabrication of PTFE-Based E-Plane Waveguide Coupler for Short Millimeter-Wave by SR Etching
    Kishihara, M.
    Murakami, M.
    Yamaguchi, A.
    Utsumi, Y.
    Ohta, I.
    2015 IEEE INTERNATIONAL SYMPOSIUM ON RADIO-FREQUENCY INTEGRATION TECHNOLOGY (RFIT), 2015, : 127 - 129
  • [9] Trial fabrication of PTFE-based E-plane waveguide coupler for short millimeter-wave by SR etching
    20161602256578
    (1) Okayama Prefectural University, Soja, Okayama; 719-1197, Japan; (2) LASTI, University of Hyogo, Kamigori, Ako, Hyogo; 678-1205, Japan; (3) University of Hyogo, Kobe, Hyogo; 651-2197, Japan, 1600, (Institute of Electrical and Electronics Engineers Inc., United States):
  • [10] Design and Fabrication of PTFE Substrate Integrated Waveguide Coupler by SR Direct Etching
    Kishihara, Mitsuyoshi
    Takeuchi, Masaya
    Yamaguchi, Akinobu
    Utsumi, Yuichi
    Ohta, Isao
    IEICE TRANSACTIONS ON ELECTRONICS, 2021, E104C (09) : 446 - 454
12345