PREDICTION OF CUTTING TEMPERATURES IN TURNING OF GLASS FIBER REINFORCED PLASTICS (GFRP) MATERIALS

被引：4
|
作者：
Chang, C. -S. [1 ]
Lin, Y. -L. [1 ]
Hwang, B. -C. [1 ]
机构：
[1] Natl Ilan Univ, Dept Mech & Electromech Engn, Ilan 26014, Taiwan
来源：
JOURNAL OF MECHANICS | 2008年 / 24卷 / 04期
关键词：
Chamfered main cutting edge; FEM; Glass-Fiber-Reinforced plastics (GFRP); Temperature of GFRP;
D O I：
10.1017/S1727719100002483
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Thirty six kinds of chamfered and unchamfered main cutting edge carbide tips were used in turning of high-strength glass-fiber-reinforced plastics (GFRP) materials to study the cutting temperature of tip's surface. The frictional forces and heat generated on elementary cutting tools are calculated by using the measured cutting forces and the theoretical cutting analysis. The heat partition factors between the tip and chip are solved by using the inverse heat transfer analysis, which utilizes temperature on the K type carbide tip's surface measured by infrared as the input. The tip's surface temperature of the carbide is solved by finite element analysis (FEA) and compared with those obtained from experimental measurements. A good agreement demonstrates the accuracy of the proposed model.
引用
收藏
页码：357 / 368
页数：12
相关论文
共 50 条
  • [41] Systemic Approach of Ultrasonically Assisted Cutting of Glass Fiber Reinforced Polymeric Materials
    Ionescu, Nicolae
    Ghionea, Ionut
    Tonoiu, Sergiu
    Catana, Madalin
    MATERIALE PLASTICE, 2015, 52 (03) : 351 - 355
  • [42] Prediction of shear behavior of steel fiber-reinforced rubberized concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars
    Hosseini, Seyyed-Asgar
    Nematzadeh, Mahdi
    Chastre, Carlos
    COMPOSITE STRUCTURES, 2021, 256
  • [43] Prediction of Cutting Force in End Milling of Glass Fiber Reinforced Polymer (GFRP) Composites Using Adaptive Neuro Fuzzy Inference System (ANFIS)
    Effendi, Mohammad Khoirul
    Soepangkat, Bobby Oedy Pramoedyo
    Suhardjono
    Norcahyo, Rachmadi
    Sutikno
    Sampurno
    INNOVATIVE SCIENCE AND TECHNOLOGY IN MECHANICAL ENGINEERING FOR INDUSTRY 4.0, 2019, 2187
  • [44] DYNAMIC SINGULAR STRESSES IN CRACKED GLASS-FIBER-REINFORCED PLASTICS AT LOW-TEMPERATURES
    UEDA, S
    SHINDO, Y
    JSME INTERNATIONAL JOURNAL SERIES A-MECHANICS AND MATERIAL ENGINEERING, 1993, 36 (04): : 367 - 373
  • [45] SINGULAR STRESSES OF GLASS-FIBER-REINFORCED PLASTICS WITH A BROKEN LAYER AT LOW-TEMPERATURES
    UEDA, S
    SHINDO, Y
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 176 (1-2): : 471 - 482
  • [46] Corrosion life prediction of glass fiber reinforced plastics by optimized BP neural network
    bin, Liu
    Liu, Yingwei
    INORGANIC CHEMISTRY COMMUNICATIONS, 2022, 144
  • [47] Transient thermal-mechanical response of glass-fiber reinforced plastics at low temperatures
    Y. Shindo
    F. Narita
    Acta Mechanica, 2002, 157 : 159 - 174
  • [48] FATIGUE LIFE PREDICTION OF GLASS FIBER-REINFORCED PLASTICS USING THE ACOUSTOULTRASONIC TECHNIQUE
    SRIVASTAVA, VK
    PRAKASH, R
    INTERNATIONAL JOURNAL OF FATIGUE, 1987, 9 (03) : 175 - 178
  • [49] Transient thermal-mechanical response of glass-fiber reinforced plastics at low temperatures
    Shindo, Y
    Narita, F
    ACTA MECHANICA, 2002, 157 (1-4) : 159 - 174
  • [50] Experimental investigation on fiber laser cutting carbon fiber reinforced plastics
    Zhang, Y.
    Qi, L.
    ADVANCED LASER PROCESSING AND MANUFACTURING IV, 2020, 11546
12345