Optimization of Tube Hydroforming Process Using Simulated Annealing Algorithm

被引：19
|
作者：
Mirzaali, M. [1 ]
Liaghat, G. H. [1 ]
Naeini, H. Moslemi [1 ]
Seyedkashi, S. M. H. [1 ]
Shojaee, K. [2 ]
机构：
[1] Tarbiat Modares Univ, Dept Mech Engn, Tehran, Iran
[2] Univ Tehran, Dept Elect & Comp Engn, Tehran 14174, Iran
来源：
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11) | 2011年 / 10卷
关键词：
Tube Hydroforming Process; Optimization; Simulated Annealing; Finite Element Analysis; EXPERIMENTAL-VERIFICATION; PARAMETERS;
D O I：
10.1016/j.proeng.2011.04.499
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, forming parameters of tube hydroforming (THF) process are investigated and optimized using Simulated Annealing optimization algorithm linked with a finite element commercial code. The goal of this research is to obtain the maximum formability of two dimensional (2D) axisymmetric tubes under a failure criteria based on material's forming limit diagram (FLD). The initial approximated pressure loading path is determined by proved theoretical equations. Then the Simulated Annealing algorithm written in Matlab software is combined with a nonlinear structural finite element code ANSYS/LS-DYNA in order to optimize internal hydraulic pressure. The results are compared by experimental observations and a good agreement was observed between them. (C) 2011 Published by Elsevier Ltd. Selection and peer-review under responsibility of ICM11
引用
收藏
页码：3012 / 3019
页数：8
相关论文
共 50 条
  • [21] FEM Simulation and Optimization of Process Parameters for Tube Hydroforming
    Chen, Chengzhan
    Gan, Yi
    Du, Jitao
    Huang, Can
    Chen, Qijun
    ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION II, PTS 1 AND 2, 2012, 102-102 : 901 - +
  • [22] Finite element analysis and optimization of tube hydroforming process
    Raut, Shreedhar Vinayak
    Ramesh, Ajith
    Arun, A.
    Sumesh, C. S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 5008 - 5016
  • [23] Rapid coupling optimization method for a tube hydroforming process
    Chebbah, M. S.
    Naceur, H.
    Hecini, M.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2010, 224 (B2) : 245 - 256
  • [24] Tube Hydroforming (THF): Process Optimization of an Automotive Component
    Attanasio, Aldo
    Ceretti, Elisabetta
    Maccarini, Giancarlo
    SHEET METAL 2013, 2013, 549 : 141 - +
  • [25] Preliminary Study on Optimization of the Tube Hydroforming Process Using the Equivalent Static Loads
    Jang, Hwan-Hak
    Park, Gyung-Jin
    Kim, Tai-Kyung
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2015, 39 (03) : 259 - 268
  • [26] Hydroforming process optimization of aluminum alloy tube using intelligent control technique
    Manabe, K
    Suetake, M
    Koyama, H
    Yang, M
    PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON NEW FORMING TECHNOLOGY, 2004, : 73 - 78
  • [27] Optimization of the loading path for the tube-hydroforming process
    Jang, Hwan-Hak
    Lee, Youngmyung
    Park, Gyung-Jin
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2016, 230 (12) : 1605 - 1623
  • [28] Study of loading path optimization for tube hydroforming process
    Yang, Bing
    Zhang, Wei-Gang
    Lin, Zhong-Qin
    Zhang, Jian-Ming
    Suxing Gongcheng Xuebao/Journal of Plasticity Engineering, 2006, 13 (04): : 10 - 14
  • [29] Optimization of Tube Hydroforming Process (without Axial feed) by using FEA Simulations
    Shinde, Rakesh A.
    Patil, Bhushan T.
    Joshi, Ketaki N.
    3RD INTERNATIONAL CONFERENCE ON INNOVATIONS IN AUTOMATION AND MECHATRONICS ENGINEERING 2016, ICIAME 2016, 2016, 23 : 398 - 405
  • [30] Hydroforming process optimization of aluminum alloy tube using intelligent control technique
    Manabe, Ken-ichi
    Suetake, Masamitsu
    Koyama, Hiroshi
    Yang, Ming
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (11): : 1207 - 1211
12345