OPTIMIZATION OF BEECH BED PRODUCTION PROCESS

被引：0
|
作者：
Mihulja, Goran [1 ]
Basar, Tomislav [1 ]
Poljak, Dominik [2 ]
机构：
[1] Univ Zagreb, Fac Forestry, Zagreb 41000, Croatia
[2] Drvodjelac Doo, Zagreb, Croatia
来源：
WOOD IS GOOD - PROPERTIES, TECHNOLOGY, VALORISATION, APPLICATION, 19TH INTERNATIONAL SCIENTIFIC CONFERENCE, 2008 | 2008年
关键词：
metal angles; double thread nuts; beech wood; time saving; extraction strength;
D O I：
暂无
中图分类号：
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号：
0805 ; 080502 ; 0822 ;
摘要：
Beech bed assembly involves a process where double thread nuts are screwed into the bed sides and then the connecting metal angles are fixed to them by metric thread bolts. In the production process, however, a problem was identified, which the present work addresses by optimizing the technological process in order to save production time while at the same time upholding the product quality level. Tests have been conducted to determine optimum bore diameter for screwing down the nuts relative to the extraction strength and time interval needed for nut screwing. This has shortened the time of bed fabrication (nut screwing) and ensured optimum structural strength.
引用
收藏
页码：97 / +
页数：2
相关论文
共 50 条
  • [1] Fluid bed granulation - Process optimization
    Koleilat, Line
    Paasche, Christian Karl
    Wade, Jonathan
    Hanson, Joshua
    Wassgren, Carl
    Mort, Paul
    POWDER TECHNOLOGY, 2025, 449
  • [2] Optimization of an acrolein production process in a pilot-scale fixed-bed reactor
    Lei, M.
    Lesage, F.
    Latifi, M. A.
    Tretjak, S.
    26TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING (ESCAPE), PT B, 2016, 38B : 1261 - 1266
  • [3] Parametric study and process optimization for solar pyrolysis of beech wood
    Zeng, Kuo
    Gauthier, Daniel
    Lu, Jidong
    Flamant, Gilles
    ENERGY CONVERSION AND MANAGEMENT, 2015, 106 : 987 - 998
  • [4] Process engineering and optimization of glycerol separation in a packed-bed reactor for enzymatic biodiesel production
    Hama, Shinji
    Tamalampudi, Sriappareddy
    Yoshida, Ayumi
    Tamadani, Naoki
    Kuratani, Nobuyuki
    Noda, Hideo
    Fukuda, Hideki
    Kondo, Akihiko
    BIORESOURCE TECHNOLOGY, 2011, 102 (22) : 10419 - 10424
  • [5] A FLUIDIZED-BED PROCESS FOR TRICHLOROSILANE PRODUCTION
    不详
    BRITISH CHEMICAL ENGINEERING, 1966, 11 (09): : 927 - &
  • [6] FLUIDIZED-BED PROCESS FOR PRODUCTION OF TUNGSTEN
    OXLEY, JH
    BEIDLER, EA
    BLOCHER, JM
    LYONS, CJ
    PARK, RS
    PEARSON, JH
    NUCLEAR APPLICATIONS, 1965, 1 (06): : 567 - &
  • [7] OPTIMIZATION OF CHLOROPHOS PRODUCTION PROCESS
    DENISOV, AP
    SAPOZHKOV, YN
    SCHERBATYKH, YI
    SHVETSOVASHILOVSKAYA, KD
    KLUBOV, AY
    LEVCHENKO, GF
    MAKSIMOVA, VA
    KHIMICHESKAYA PROMYSHLENNOST, 1982, (04): : 242 - 243
  • [8] Process optimization for pellets production
    Vigants, Haralds
    Priedniece, Vivita
    Veidenbergs, Ivars
    Blumberga, Dagnija
    INTERNATIONAL SCIENTIFIC CONFERENCE - ENVIRONMENTAL AND CLIMATE TECHNOLOGIES, CONECT 2016, 2017, 113 : 396 - 402
  • [9] OPTIMIZATION OF THE HYDROLINE PRODUCTION PROCESS
    CHERKAEV, VG
    BUSHUYUSHCHII, VN
    BLIZNYAK, NV
    SHAPIRO, LD
    KHIMIKO-FARMATSEVTICHESKII ZHURNAL, 1982, 16 (09): : 1104 - 1107
  • [10] Optimization and Simulation of the Sabatier Reaction Process in a Packed Bed
    Hou, Baolin
    Huang, Yanqiang
    Wang, Xiaodong
    Yang, Xiaofeng
    Duan, Hongming
    Zhang, Tao
    AICHE JOURNAL, 2016, 62 (08) : 2879 - 2892
12345