Processing issues of color mismatch: Rheological characterization of polycarbonate blends

被引:9
|
作者
Alsadi, J. [1 ]
Saeed, U. [1 ]
Ahmad, S. [1 ]
Rizvi, G. [1 ]
Ross, D. [2 ]
机构
[1] Univ Ontario & Inst Technol, Fac Engn & Appl Sci, Oshawa, ON L1H 7K4, Canada
[2] SABIC Innovat Plast, Cobourg, ON, Canada
来源
POLYMER ENGINEERING AND SCIENCE | 2015年 / 55卷 / 09期
基金
加拿大自然科学与工程研究理事会;
关键词
Color mismatches - Compounders - Dynamic frequency - Dynamic strain - Lexan polycarbonates - Mode dynamics - Polycarbonate blends - Rheological characterization - Strain sweeps - Twin screw;
D O I
10.1002/pen.24041
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
In this study, resins of two Lexan polycarbonates with and without the addition of pigments and additives were blended in a Thermo Haake Mini Lab II twin-screw micro compounder. The blends were rheologically characterized using dynamic strain sweep mode, dynamic frequency sweep mode, and steady rate sweep mode. The tests were performed at 230 degrees C, 255 degrees C, and 280 degrees C under nitrogen atmosphere. The obtained results present that the variation in polycarbonate resin proportions and temperature significantly affected the rheological properties. The focus was extended on the polycarbonate blend having composition of two resins 30/70% and the obtained viscosity data was correlated to color changes. POLYM. ENG. SCI., 55:1994-2001, 2015. (c) 2014 Society of Plastics Engineers
引用
收藏
页码:1994 / 2001
页数:8
相关论文
共 50 条
  • [41] Thermoplastic copolyether ester elastomer toughened polycarbonate blends - 2. Thermal and rheological studies
    Sivaraman, P
    Manoj, NR
    Barman, S
    Chandrasekhar, L
    Mishra, VS
    Samui, AB
    Chakraborty, BC
    POLYMER TESTING, 2004, 23 (06) : 645 - 649
  • [42] Effect of interfacial interaction on rheological behavior of blends of a semiflexible liquid-crystalline polyester and polycarbonate
    Zhao, W
    Chua, YC
    Lu, XH
    JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 90 (11) : 3051 - 3058
  • [44] Rheological properties and the interface in polycarbonate/impact modifier blends: Effect of modifier shell molecular weight
    Memon, NA
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 1998, 36 (07) : 1095 - 1105
  • [45] Rheological and mechanical properties of polycarbonate-liquid-crystalline polymer blends with controlled chemical reactions
    Kil, SB
    Park, OO
    Yoon, KH
    JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 82 (11) : 2799 - 2807
  • [46] Formulation, characterization and optimization of the processing condition of blends of recycled polyethylene and ground tyre rubber: Mechanical and rheological analysis
    Scaffaro, R
    Dintcheva, NT
    Nocilla, MA
    La Mantia, FP
    POLYMER DEGRADATION AND STABILITY, 2005, 90 (02) : 281 - 287
  • [47] CHARACTERIZATION OF POLYESTER POLYCARBONATE BLENDS BY SIZE EXCLUSION CHROMATOGRAPHY AND MELT RHEOMETRY
    MILLER, RL
    BROOKS, RV
    BRIDDELL, JE
    POLYMER ENGINEERING AND SCIENCE, 1990, 30 (01): : 59 - 62
  • [48] Preparation and physical characterization of conjugated polymer-polycarbonate polymer blends
    Abu Abdeen, M.
    Ayesh, Ayman S.
    Ibrahim, S. S.
    Al Khaldi, Rana H.
    JOURNAL OF COMPOSITE MATERIALS, 2014, 48 (16) : 1947 - 1957
  • [49] Thermal characterization and morphological study of polyphenylene sulfide-polycarbonate blends
    Lim, SH
    Kim, JY
    Park, M
    Choe, CR
    Lee, JM
    Kim, DH
    POLYMER ENGINEERING AND SCIENCE, 1996, 36 (20): : 2502 - 2508
  • [50] Processing and characterization of polycarbonate-polyurethane/nanosilver composites
    Morillo, Reinaldo Colon
    Julien, Tamalia
    Harmon, Julie
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2016, 251