Chemical degradation of 3d printed polymers

被引：0
|
作者：
Kaspar, Vaclav [1 ]
Rozlivka, Jakub [1 ]
机构：
[1] Mendel Univ Brno, Dept Technol & Automobile Transport, Zemedelska 1, Brno 61300, Czech Republic
来源：
MENDELNET 2019: PROCEEDINGS OF 26TH INTERNATIONAL PHD STUDENTS CONFERENCE | 2019年
关键词：
3d printing; tensile test; chemical degradation; liquid fertilizer;
D O I：
暂无
中图分类号：
S [农业科学];
学科分类号：
09 ;
摘要：
This template describes the features of the components created by additive technology called 3d printing. The material tested was PETG. This is a very popular print material. Normalized samples in the fish bone shape with a 20% grid fill were tested. The tested samples were subjected to chemical degradation in various types of environments and subsequently a tensile test was performed. The result of the research is the influence of the degradation factor on the mechanical properties of these samples and possible use in practice, specifically in agriculture.
引用
收藏
页码：511 / 515
页数：5
相关论文
共 50 条
  • [21] Modelling the interphase of 3D printed photo-cured polymers
    De Noni, Lorenzo
    Zorzetto, Laura
    Briatico-Vangosa, Francesco
    Rink, Marta
    Ruffoni, Davide
    Andena, Luca
    COMPOSITES PART B-ENGINEERING, 2022, 234
  • [22] Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites
    Kozior, Tomasz
    Mamun, Al
    Trabelsi, Marah
    Wortmann, Martin
    Lilia, Sabantina
    Ehrmann, Andrea
    POLYMERS, 2019, 11 (12)
  • [23] Mechanical Characteristics of Thermoplastic Polymers for 3d Printed Hybrid Structures
    O. Bulderberga
    E. Zīle
    R. Joffe
    J. Sevcenko
    A. Aniskevich
    Mechanics of Composite Materials, 2024, 60 : 17 - 32
  • [24] SHAPE RECOVERY CHARACTERISTICS OF 3D PRINTED SOFT POLYMERS AND THEIR COMPOSITES
    Liu, Wenbo
    Wu, Nan
    Pochiraju, Kishore
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 14, 2017,
  • [25] Investigation into impact properties of adhesively bonded 3D printed polymers
    Ozenc, Murat
    Tezel, Tugce
    Kovan, Volkan
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2022, 118
  • [26] 3D printed polymers toxicity profiling - A caution for biodevice applications
    Zhu, Feng
    Skommer, Joanna
    Friedrich, Timo
    Kaslin, Jan
    Wlodkowic, Donald
    MICRO+NANO MATERIALS, DEVICES, AND SYSTEMS, 2015, 9668
  • [27] Mechanical Characteristics of Thermoplastic Polymers for 3d Printed Hybrid Structures
    Bulderberga, O.
    Zile, E.
    Joffe, R.
    Sevcenko, J.
    Aniskevich, A.
    MECHANICS OF COMPOSITE MATERIALS, 2024, 60 (01) : 17 - 32
  • [28] Evaluation of 3D Printed Polymers for Investment Casting Expendable Patterns
    Seals, M. E.
    McKinney, S. R.
    Stockhausen, P. J.
    Bottoms, S. R.
    Druschitz, A. P.
    TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 122, 2014, 122 : 145 - 159
  • [29] On reducing anisotropy in 3D printed polymers via ionizing radiation
    Shaffer, Steven
    Yang, Kejia
    Vargas, Juan
    Di Prima, Matthew A.
    Voit, Walter
    POLYMER, 2014, 55 (23) : 5969 - 5979
  • [30] 3D Printed
    Good, Andrew
    MATERIALS EVALUATION, 2016, 74 (07) : 984 - 989
12345