Corrosion properties of a complex multi-phase martensitic stainless steel depending on the tempering temperature

被引：18
|
作者：
Seifert, M. [1 ]
Wieskaemper, D. [1 ]
Tonfeld, T. [1 ]
Huth, S. [1 ]
机构：
[1] Ruhr Univ Bochum, Chair Mat Technol, D-44780 Bochum, Germany
来源：
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION | 2015年 / 66卷 / 11期
关键词：
HIGH-SPEED STEELS; HEAT-TREATMENT; ANODIC POLARIZATION; RESISTANCE; CEMENTITE; PASSIVITY; CHROMIUM; BEHAVIOR; ALLOYS; METALS;
D O I：
10.1002/maco.201508229
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, the corrosion resistance of X190CrVMo20-4-1 martensitic stainless steel and the hardness are correlated with the tempering temperature. The steel was hardened from a typical austenitisation temperature, quenched in oil and tempered up to 600 degrees C. The corrosion resistance was investigated by means of electrochemical tests, in both 5% sulphuric acid and in 3% sodium chloride. Static immersion tests were performed in H2SO4 only. The best compromise for a high hardness and corrosion resistance is found for tempering between 100 and 200 degrees C. The data obtained can be used for designing and application of this steel.
引用
收藏
页码：1290 / 1298
页数：9
相关论文
共 50 条
  • [21] Effect of the Tempering Process on the Corrosion Performance of Wire Arc Additively Manufactured 420 Martensitic Stainless Steel
    Lunde, Jonas
    Salahi, Salar
    Nemani, Alireza Vahedi
    Ghaffari, Mahya
    Nasiri, Ali
    CORROSION, 2022, 78 (09) : 850 - 864
  • [22] Influence of the microstructure on the corrosion behaviour of low-carbon martensitic stainless steel after tempering treatment
    Vignal, V.
    Ringeval, S.
    Thiebaut, S.
    Tabalaiev, K.
    Dessolin, C.
    Heintz, O.
    Herbst, F.
    Chassagnon, R.
    CORROSION SCIENCE, 2014, 85 : 42 - 51
  • [23] Effect of tempering temperature on impact energy of AISI 410 martensitic stainless steel at low temperatures
    Suwanpatcharakul, Kittipat
    Saenarjhan, Nithi
    Nakthong, Nathi
    Lothongkum, Anchaleeporn Waritswat
    Lothongkum, Gobboon
    MATERIALS TESTING, 2021, 63 (08) : 699 - 704
  • [24] Effects of Low-Temperature Tempering on Microstructure and Properties of the Laser-Cladded AISI 420 Martensitic Stainless Steel Coating
    Zhu, Hongmei
    Li, Yongzuo
    Li, Baichun
    Zhang, Zhenyuan
    Qiu, Changjun
    COATINGS, 2018, 8 (12)
  • [25] Effects of tempering temperature on the microstructure evolution and mechanical properties of 16%Cr-5%Ni super martensitic stainless steel
    Song, Yisi
    Li, Chuanwei
    Liao, Yu
    Han, Lizhan
    Gu, Jianfeng
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 9306 - 9322
  • [26] Influence of austenitizing and tempering on the corrosion behavior and sensitization of martensitic stainless steel X50CrMoV15
    Babutzka, Martin
    Heyn, Andreas
    Rosemann, Paul
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2018, 69 (10): : 1338 - 1349
  • [27] Effect of Tempering Temperature on Microstructure and Intergranular Corrosion Property of 2205 Duplex Stainless Steel
    Luo, Xianfu
    Fang, Kun
    Zhang, Wenli
    Zhang, Jinmin
    Yang, Xiao
    Liu, Xiaoyong
    Zha, Xiaoqin
    Zhang, Xinyao
    COATINGS, 2024, 14 (06)
  • [28] Mossbauer study of tempering of the stainless martensitic steel alloyed with nitrogen and/or carbon
    Berns, H
    Ehrhardt, R
    Duz, VA
    Gavriljuk, VG
    Tarasenko, AV
    METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 1995, 17 (06): : 19 - 25
  • [29] Tempering of martensitic stainless steel with 0.6 w/o nitrogen and/or carbon
    Berns, H
    Gavriljuk, V
    JOURNAL DE PHYSIQUE IV, 1997, 7 (C5): : 263 - 268
  • [30] Effect of a nitrogen addition on mechanical and corrosion properties of 1.4116 martensitic stainless steel
    Bourgin, C.
    Chauveau, E.
    Arnaud, A.
    REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 2006, 103 (01): : 32 - 36
12345