Corrosion properties of a complex multi-phase martensitic stainless steel depending on the tempering temperature

被引：18
|
作者：
Seifert, M. [1 ]
Wieskaemper, D. [1 ]
Tonfeld, T. [1 ]
Huth, S. [1 ]
机构：
[1] Ruhr Univ Bochum, Chair Mat Technol, D-44780 Bochum, Germany
来源：
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION | 2015年 / 66卷 / 11期
关键词：
HIGH-SPEED STEELS; HEAT-TREATMENT; ANODIC POLARIZATION; RESISTANCE; CEMENTITE; PASSIVITY; CHROMIUM; BEHAVIOR; ALLOYS; METALS;
D O I：
10.1002/maco.201508229
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, the corrosion resistance of X190CrVMo20-4-1 martensitic stainless steel and the hardness are correlated with the tempering temperature. The steel was hardened from a typical austenitisation temperature, quenched in oil and tempered up to 600 degrees C. The corrosion resistance was investigated by means of electrochemical tests, in both 5% sulphuric acid and in 3% sodium chloride. Static immersion tests were performed in H2SO4 only. The best compromise for a high hardness and corrosion resistance is found for tempering between 100 and 200 degrees C. The data obtained can be used for designing and application of this steel.
引用
收藏
页码：1290 / 1298
页数：9
相关论文
共 50 条
  • [1] Effect of Tempering Temperature on Mechanical and Corrosion Properties of Modified Martensitic Stainless Steel CA6NM
    Mukhlis Agung Prasetyo
    Nofrijon Sofyan
    Faried M. Ridlo
    Efendi Mabruri
    Metal Science and Heat Treatment, 2024, 65 : 657 - 662
  • [2] Effect of tempering temperature on the microstructure, corrosion resistance, and antibacterial properties of Cu-bearing martensitic stainless steel
    Hao, Xinxin
    Xi, Tong
    Xu, Zhiqiang
    Liu, Lichu
    Yang, Chunguang
    Yang, Ke
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2021, 72 (10): : 1668 - 1676
  • [3] Effect of Tempering Temperature on Mechanical and Corrosion Properties of Modified Martensitic Stainless Steel CA6NM
    Prasetyo, Mukhlis Agung
    Sofyan, Nofrijon
    Ridlo, Faried M.
    Mabruri, Efendi
    METAL SCIENCE AND HEAT TREATMENT, 2024, 65 (9-10) : 588 - 595
  • [4] Corrosion Behavior of Multi-Phase Stainless Steel in 15% Hydrochloric Acid at a Temperature of 80°C
    Eguchi, K.
    Ishiguro, Y.
    Ota, H.
    CORROSION, 2015, 71 (11) : 1398 - 1405
  • [5] Rapid Tempering of Martensitic Stainless Steel AISI420: Microstructure, Mechanical and Corrosion Properties
    Bijan Abbasi-Khazaei
    Akbar Mollaahmadi
    Journal of Materials Engineering and Performance, 2017, 26 : 1626 - 1633
  • [6] Rapid Tempering of Martensitic Stainless Steel AISI420: Microstructure, Mechanical and Corrosion Properties
    Abbasi-Khazaei, Bijan
    Mollaahmadi, Akbar
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (04) : 1626 - 1633
  • [7] Effect of Tempering Time on the Microstructure and Properties of Martensitic Stainless Steel
    Jiang, Wei
    Wu, Dong
    Zhang, Qinyi
    Li, Mingxuan
    Liu, Wei
    METALS, 2024, 14 (03)
  • [8] Effect of Tempering Temperature on Microstructure and Properties of Laser-cladded Martensitic Stainless Steel Layer
    Zhu Hongmei
    Hu Wenfeng
    Li Yongzuo
    Li Baichun
    Qiu Changjun
    CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2019, 46 (12):
  • [9] Effect of High Temperature Tempering on The Mechanical Properties and Microstructure of The Modified 410 Martensitic Stainless Steel
    Mabruri, Efendi
    Pasaribu, Rahmat Ramadhan
    Sugandi, Moh. Tri
    Sunardi
    METALLURGY AND ADVANCED MATERIAL TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT, 2018, 1964
  • [10] Effect of Tempering Process on Structure and Properties of Super Martensitic Stainless Steel
    Sun, Hudai
    Zhao, Kunyu
    Rui, Jiaqun
    Jiang, Wen
    Han, Xiaochen
    Yong, Qilong
    Su, Jie
    FRONTIERS OF MATERIALS, CHEMICAL AND METALLURGICAL TECHNOLOGIES, PTS 1 AND 2, 2012, 581-582 : 1023 - +
12345