Characteristics of sodium compounds on NO reduction at high temperature in NOx control technologies

被引:31
|
作者
Yang, Weijuan [1 ]
Zhou, Junhu [1 ]
Zhou, Zhijun [1 ]
Lu, Zhimin [1 ]
Wang, Zhihua [1 ]
Liu, Jianzhong [1 ]
Cen, Kefa [1 ]
机构
[1] Zhejiang Univ, State Key Lab Clean Energy Utilizat, Hangzhou 310027, Peoples R China
基金
中国国家自然科学基金;
关键词
Sodium compounds; Nitrogen oxides; Reburning; SNCR; Combustion;
D O I
10.1016/j.fuproc.2008.06.002
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
Characteristics of sodium compounds additives on NO reduction at high temperature were investigated in a tube stove and a drop tube furnace. Sodium carbonate, sodium hydroxide and sodium acetate were chosen as Na additives to research the effect on NO reduction. It was found that sodium compounds could reduce NO emission and promoted NO reduction efficiency during pulverized coal combustion, coal reburning and urea-SNCR process. Adding sodium carbonate into crude coal gained 3.2%-34.8% of NO reduction efficiency on different combustion conditions during the coal combustion process. NO reduction efficiency was affected by sodium content and coal rank. Na additive performed NO reduction effect in whole Shenhua coal combustion process and in char rear combustion of Gelingping coal. Adding sodium hydroxide into the reburning coal increased NO reduction efficiency of the reburning technology. NO reduction efficiency was increased to 82.7% from 50.0% when the weight ratio sodium to the reburning coal was 3% and the ratio of the supplied air to the theoretical air of reburning fuel was 0.6. Sodium carbonate, sodium hydroxide and sodium acetate performed the promotion of NO reduction efficiency in urea-SNCR. Sodium acetate promoted NO reduction efficiency best while sodium hydroxide promoted worst at 800 degrees C. Sodium additives as SNCR promoter performed much better at lower temperature than at higher temperature, and they promoted NO reduction weakly in urea-SNCR when the temperature was greater than 900 degrees C. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:1317 / 1323
页数:7
相关论文
共 50 条
  • [21] NOx emission control technologies in sludge pyrolysis and combustion
    Yang, X.
    Wang, X.
    Cai, Y.
    Wang, L.
    ENVIRONMENTAL ENGINEERING III, 2010, : 115 - 117
  • [22] FRICTION CHARACTERISTICS OF HARDFACING MATERIALS IN HIGH-TEMPERATURE SODIUM
    MIZOBUCHI, S
    KANO, S
    NAKAYAMA, K
    ATSUMO, H
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1980, 44 (05) : 479 - 486
  • [23] Restart characteristics of high-temperature sodium heat pipe
    Yu, Ping
    Zhang, Hong
    Xu, Hui
    Shen, Yan
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2015, 35 (02): : 404 - 410
  • [24] Corrosion test of mild steel in high-temperature sodium compounds
    Aoto, K
    Hirakawa, Y
    Kuroda, T
    HIGH TEMPERATURE CORROSION AND MATERIALS CHEMISTRY, PROCEEDINGS, 1998, 98 (09): : 275 - 286
  • [25] AN ADVANCED SELECTIVE REDUCTION PROCESS FOR NOX CONTROL
    HEAP, MP
    CHEN, SL
    KRAMLICH, JC
    MCCARTHY, JM
    PERSHING, DW
    NATURE, 1988, 335 (6191) : 620 - 622
  • [26] SODIUM BOROHYDRIDE REDUCTION OF OXYMERCURY COMPOUNDS
    GRAY, GA
    JACKSON, WR
    JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 1969, 91 (22) : 6205 - &
  • [28] Theoretical analysis and experimental confirmation of exhaust temperature control for diesel vehicle NOx emissions reduction
    Jiang, Jibing
    Li, Dinggen
    APPLIED ENERGY, 2016, 174 : 232 - 244
  • [29] OPERATING CHARACTERISTICS AND COMMERCIAL OPERATING EXPERIENCE WITH HIGH-TEMPERATURE SCR NOX CATALYST
    HECK, RM
    CHEN, JM
    SPERONELLO, BK
    ENVIRONMENTAL PROGRESS, 1994, 13 (04): : 221 - 225
  • [30] Research on Application Characteristics of Zirconia-Based High-Temperature NOx Sensors
    Wang, Jie
    Li, Xi
    Wang, Zhen
    Feng, Jiangtao
    Lin, Weixun
    Peng, Jingxuan
    ENERGIES, 2022, 15 (08)