Simulation Study on Cutting Force and Cutting Temperature in Turning of Titanium Alloy

被引：1
|
作者：
Yang, Dapeng [1 ]
Liu, Yu [1 ]
Ma, Fujian [1 ]
Sha, Zhihua [1 ]
Zhang, Shengfang [1 ]
机构：
[1] Dalian Jiaotong Univ, Sch Mech Engn, Dalian, Peoples R China
来源：
2019 5TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND AUTOMATION SCIENCE (ICMEAS 2019) | 2019年 / 692卷
关键词：
FLANK WEAR; TI6AL4V;
D O I：
10.1088/1757-899X/692/1/012014
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The objective of this paper is to study the cutting force and cutting temperature in turning of titanium alloy. The simulation of cutting force and cutting temperature by finite element simulation software ABAQUS is conducted. The orthogonal experiment is designed. The influence of various factors on cutting force and cutting temperature is obtained. A prediction model of cutting temperature and cutting force is obtained by performing multiple linear regression analysis on the data obtained from orthogonal experiments.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Study on cutting temperature during milling of titanium alloy based on FEM and experiment
    Yang, Yong
    Zhu, Weiwei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 73 (9-12): : 1511 - 1521
  • [42] Laser cutting of titanium alloy
    Wang, Kunlin
    Zang, Donghong
    Zhu, Yunming
    Xiyou jinshu cailiao yu gongcheng, 1994, 23 (01): : 62 - 65
  • [43] Research on the Influence of the Cutting Speed on the Specific Cutting Force During Turning
    Velchev, Stefan
    Kolev, Ivan
    Ivanov, Krassimir
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2009, 55 (06): : 400 - 405
  • [44] Optimization of Cutting Parameters for Minimization of Cutting Temperature and Surface Roughness in Turning of Al6061 Alloy
    Rajesh, N.
    Yohan, M.
    Venkataramaiah, P.
    Pallavi, M. Vani
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) : 8624 - 8632
  • [45] Influence of cutting parameters on cutting force and surface finish in turning operation
    Rao, C. J.
    Rao, D. Nageswara
    Srihari, P.
    INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013), 2013, 64 : 1405 - 1415
  • [46] Cutting simulation of titanium alloy drilling with energy analysis and FEM
    Matsumura, Takashi
    Tamura, Shoichi
    15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO), 2015, 31 : 252 - 257
  • [47] Sustainability Assessment Comparison of Cutting Fluid for Turning of Titanium Alloy Grade II
    Santankumar Chaurasiya
    Gurraj Singh
    Process Integration and Optimization for Sustainability, 2023, 7 : 805 - 811
  • [48] Finite Element Simulation of PCD Tool Cutting Titanium Alloy
    Liu, Xianli
    Zhang, Jiayi
    Wang, Yu
    Yue, Caixu
    Liu, Fei
    ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII, 2014, 589-590 : 64 - 69
  • [49] Cutting Force and Tool Failure in Turning Cutting HSTRs by Ceramic Tools
    Xu, Huanan
    Chen, Si'an
    Sun, Zhaoqun
    2ND INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE, RESOURCE AND ENVIRONMENTAL ENGINEERING (MSREE 2017), 2017, 1890
  • [50] Dry turning biomedical titanium alloy using uncoated/coated cutting inserts
    Roy, Rima Singha
    Maity, Kalipada
    MATERIALS AND MANUFACTURING PROCESSES, 2025, 40 (01) : 37 - 52
12345