Simulation Study on Cutting Force and Cutting Temperature in Turning of Titanium Alloy

被引：1
|
作者：
Yang, Dapeng [1 ]
Liu, Yu [1 ]
Ma, Fujian [1 ]
Sha, Zhihua [1 ]
Zhang, Shengfang [1 ]
机构：
[1] Dalian Jiaotong Univ, Sch Mech Engn, Dalian, Peoples R China
来源：
2019 5TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND AUTOMATION SCIENCE (ICMEAS 2019) | 2019年 / 692卷
关键词：
FLANK WEAR; TI6AL4V;
D O I：
10.1088/1757-899X/692/1/012014
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The objective of this paper is to study the cutting force and cutting temperature in turning of titanium alloy. The simulation of cutting force and cutting temperature by finite element simulation software ABAQUS is conducted. The orthogonal experiment is designed. The influence of various factors on cutting force and cutting temperature is obtained. A prediction model of cutting temperature and cutting force is obtained by performing multiple linear regression analysis on the data obtained from orthogonal experiments.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Simulation and Experimental Research on Cutting Force of Turning Titanium Alloy
    Zheng, Qingchun
    Yang, Cuilei
    Zhang, Shanqing
    Hu, Yahui
    2015 7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND ELECTRONICS ENGINEERING (ICMEE 2015), 2015, 31
  • [2] Experimental study on cutting temperature and cutting force in dry turning of titanium alloy using a non-coated micro-grooved tool
    Xie, J.
    Luo, M. J.
    Wu, K. K.
    Yang, L. F.
    Li, D. H.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013, 73 : 25 - 36
  • [3] Simulation and Experimental Study on Temperature in Cryogenic Cutting of Titanium Aluminum Alloy
    Wang, Xiangyu
    Qiu, Wenhao
    Niu, Jintao
    Liu, Guoliang
    Fu, Xiuli
    Guo, Peiquan
    Qiao, Yang
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2024, 60 (19): : 318 - 331
  • [4] Mathematical simulation and optimization of cutting modes in turning of titanium alloy workpieces
    Bogoljubova, M.
    Afonasov, A.
    Kozlov, V.
    Sumtsova, O.
    INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, AUTOMATION AND CONTROL SYSTEMS 2015 (MEACS2015), 2016, 124
  • [5] Experiential formula of cutting force established in turning high temperature alloy
    Yu, Fengyun
    Wu, Lin
    Wang, He
    Fu, Yunliang
    International Journal of Control and Automation, 2015, 8 (10): : 287 - 294
  • [6] A Study on Cutting Characteristics in Turning Operations of Titanium Alloy used in Automobile
    You, Seung Hyeon
    Lee, Jeong Hwan
    Oh, Sung Hoon
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2019, 20 (02) : 209 - 216
  • [7] A Study on Cutting Characteristics in Turning Operations of Titanium Alloy used in Automobile
    Seung Hyeon You
    Jeong Hwan Lee
    Sung Hoon Oh
    International Journal of Precision Engineering and Manufacturing, 2019, 20 : 209 - 216
  • [8] Influence of cutting parameters on diamond turning titanium alloy
    Zhang Yuan-Liang
    Zhou Zhi-Min
    Xiu Wei
    Xia Zhi-Hui
    ADVANCED OPTICAL MANUFACTURING TECHNOLOGIES, PTS 1 AND 2, 2007, 6722
  • [9] Cutting Force Prediction in Drilling of Titanium Alloy
    Tamura, Shoichi
    Matsumura, Takashi
    Arrazola, Pedro J.
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2012, 6 (06): : 753 - 763
  • [10] Predicting the Decrease in Cutting Force in Alloy Turning by Lubrication
    Kisel’ A.G.
    Titov Y.V.
    Toder G.B.
    Belan D.Y.
    Russian Engineering Research, 2021, 41 (01) : 36 - 40
12345