Fatigue and Fatigue Crack Growth Behavior of Tool Steel

被引：0
|
作者：
Sajuri, Z. [1 ]
Syarif, J. [1 ]
Omar, M. Z. [1 ]
Allafi, M. M. [1 ]
Sudar, M. F. [1 ]
机构：
[1] Univ Kebangsaan Malaysia, Dept Mech & Mat Engn, Bangi 43600, Selangor, Malaysia
来源：
PROCEEDINGS OF THE 1ST WSEAS INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE (MATERIALS'08) | 2008年
关键词：
Fatigue; FCG; Inclusion; Stress intensity factor; Life prediction; Tool steel;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fatigue and fatigue crack growth (FCG) behaviors of tool steel were investigated at room temperature. Fatigue tests were performed under a load control with sinusoidal waveform of stress ratio R=0.1 at a frequency of 10Hz. The fatigue crack was identified nucleated from inclusion presents at specimen surface. The inclusion became the stress raiser and acts as the fatigue fracture origin. The fatigue limit value was observed at 396Mpa. The threshold stress intensity factor range obtained from the fatigue crack growth test was 8.06MPam(1/2). The fatigue crack growth curve was then used to predict the fatigue life based on modified Paris equation. The predicted lives were in good agreement with the experimental results.
引用
收藏
页码：53 / 56
页数：4
相关论文
共 50 条
  • [31] Fatigue Crack Growth Behavior of Austenite Stainless Steel in PWR Water Conditions
    Min, Ki-Deuk
    Lee, Bong-Sang
    Kim, Seon-Jin
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2015, 25 (04): : 183 - 190
  • [32] Crack growth behavior of 4340 steel under corrosion and corrosion fatigue conditions
    Sadananda, K.
    Vasudevan, A. K.
    CORROSION REVIEWS, 2015, 33 (06) : 335 - 349
  • [33] FATIGUE LIFE AND CRACK GROWTH BEHAVIOR IN ANNEALED AND NORMALIZED 0.83% CARBON STEEL
    Makabe, Chobin
    Yamazaki, Shinya
    Miyazaki, Tatsujiro
    Fujikawa, Masaki
    SURFACE REVIEW AND LETTERS, 2015, 22 (01)
  • [34] Fatigue crack growth behavior in a harmonic structure designed austenitic stainless steel
    Zhou, Gaobin
    Ma, Hantuo
    Zhang, Zhe
    Sun, Jing
    Wang, Xiaobin
    Zeng, Peng
    Zheng, Ruixiao
    Chen, Xu
    Ameyama, Kei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 758 : 121 - 129
  • [35] ELEVATED-TEMPERATURE FATIGUE CRACK-GROWTH BEHAVIOR OF A ROTOR STEEL
    LIAW, PK
    SWAMINATHAN, VP
    ENGINEERING FRACTURE MECHANICS, 1989, 34 (02) : 457 - 463
  • [36] FATIGUE CRACK-GROWTH BEHAVIOR IN AN MN-CR AUSTENITIC STEEL
    LIAW, PK
    LEAX, TR
    FABIS, TR
    DONALD, JK
    ENGINEERING FRACTURE MECHANICS, 1987, 26 (01) : 1 - 13
  • [37] Short fatigue crack growth behavior in 18Ni marageing steel
    Xu, Z. K.
    Wang, B.
    Zhang, P.
    Zhang, Z. F.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 807
  • [38] Vacuum crack growth behavior of austenitic stainless steel under fatigue loading
    T. Takeda
    Y. Shindo
    F. Narita
    Strength of Materials, 2011, 43 : 532 - 536
  • [39] A study on fatigue crack growth behavior of aged stainless steel at elevated temperatures
    Lim, JK
    Seo, D
    Li, ZS
    FRACTURE AND STRENGTH OF SOLIDS, PTS 1 AND 2: PT 1: FRACTURE MECHANICS OF MATERIALS; PT 2: BEHAVIOR OF MATERIALS AND STRUCTURE, 1998, 145-9 : 687 - 692
  • [40] Experimental Investigation of Fatigue Crack Growth Behavior in Banded Structure of Pipeline Steel
    Zhan, Nan
    Hu, Zhengxing
    Zhang, Xiaochuan
    METALS, 2020, 10 (09) : 1 - 13
12345