Morphologies and grain orientations of Cu-Sn intermetallic compounds in Sn3.0Ag0.5Cu/Cu solder joints

被引：24
|
作者：
Liu, Wei [1 ]
Tian, Yanhong [1 ]
Wang, Chunqing [1 ]
Wang, Xuelin [1 ]
Liu, Ruiyang [1 ]
机构：
[1] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Peoples R China
来源：
MATERIALS LETTERS | 2012年 / 86卷
基金：
美国国家科学基金会;
关键词：
Interfaces; Intermetallic alloys and compounds; Orientation; Morphology; MOLTEN SN; SUBSTRATE; GROWTH; SUPERSTRUCTURE; ETA-CU6SN5; INTERFACE; EVOLUTION; CU3SN;
D O I：
10.1016/j.matlet.2012.07.016
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Morphologies and grain orientations of Cu6Sn5 and Cu3Sn intermetallic compounds (IMCs) at the interface of Sn3.5Ag0.5Cu lead-free solder alloy and copper substrates were investigated by Electron Backscatter Diffraction (EBSD) technology combined with Scanning Electron Microscopy (SEM). Scalloped Cu6Sn5, Cu6Sn5 planes and six-prism shaped Cu6Sn5 IMCs were observed at the interface after 48 h of soldering at 250 degrees C. Moreover, Cu6Sn5 planes emerged in pairs on top and beside the scalloped Cu6Sn5, and two adjacent Cu6Sn5 planes were with an angle of 120 degrees. Cu3Sn and scalloped Cu6Sn5 IMCs had preferred orientations, and they were Cu6Sn5 (0001)parallel to substrate surface, and Cu3Sn ((1) over bar 00) and (100)parallel to substrate surface. (C) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码：157 / 160
页数：4
相关论文
共 50 条
  • [21] Size effect of Sn3.0Ag0.5Cu solder joint on intermetallic layer growth
    Wang, Shaobin
    Yao, Yao
    2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 1547 - 1551
  • [22] Microstructure and properties of Sn1.0Ag0.5Cu and Sn3.0Ag0.5Cu lead-free solder
    School of Mechanical and Electrical Engineering, Jiangsu Normal University, Xuzhou
    221116, China
    不详
    450001, China
    Xiyou Jinshu, 7 (589-593):
  • [23] Size effect on microstructure and tensile properties of Sn3.0Ag0.5Cu solder joints
    Wang, Shaobin
    Yao, Yao
    Long, Xu
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2017, 28 (23) : 17682 - 17692
  • [24] Size effect on microstructure and tensile properties of Sn3.0Ag0.5Cu solder joints
    Shaobin Wang
    Yao Yao
    Xu Long
    Journal of Materials Science: Materials in Electronics, 2017, 28 : 17682 - 17692
  • [25] EFFECT OF ELECTROMIGRATION ON INTERFACIAL REACTION IN Ni/Sn3.0Ag0.5Cu/Cu FLIP CHIP SOLDER JOINTS
    Huang Mingliang
    Chen Leida
    Zhou Shaoming
    ACTA METALLURGICA SINICA, 2012, 48 (03) : 321 - 328
  • [26] Effect of Microwave Hybrid Heating on Mechanical Properties and Microstructure of Sn3.0Ag0.5Cu/Cu Solder Joints
    Idris, S. R. A.
    Mazelan, M. N.
    INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2023, 20 (03) : 10736 - 10744
  • [27] Study of intermetallic growth on PWBs soldered with Sn3.0Ag0.5Cu
    Lee, M
    Hwang, Y
    Pecht, M
    Park, J
    Kim, Y
    Liu, W
    54TH ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, VOLS 1 AND 2, PROCEEDINGS, 2004, : 1338 - 1346
  • [28] Electromigration in Sn3.0Ag0.5Cu flip chip solder joint
    Lu Yu-Dong
    He Xiao-Qi
    En Yun-Fei
    Wang Xin
    Zhuang Zhi-Qiang
    ACTA PHYSICA SINICA, 2009, 58 (03) : 1942 - 1947
  • [29] Constitutive and Aging Behavior of Sn3.0Ag0.5Cu Solder Alloy
    Mysore, Kaushik
    Subbarayan, Ganesh
    Gupta, Vikas
    Zhang, Ron
    IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, 2009, 32 (04): : 221 - 232
  • [30] Suppressing the growth of Cu-Sn intermetallic compounds in Ni/Sn-Ag-Cu/Cu-Zn solder joints during thermal aging
    Yu, Chi-Yang
    Chen, Wei-Yu
    Duh, Jenq-Gong
    INTERMETALLICS, 2012, 26 : 11 - 17
12345