Ultrafine ferrite in low carbon steel

被引：240
|
作者：
Hodgson, PD [1 ]
Hickson, MR
Gibbs, RK
机构：
[1] Deakin Univ, Sch Engn & Technol, Geelong, Vic, Australia
[2] Melbourne Labs, BHP Res, Mulgrave, Australia
[3] BHP Steel, Hastings On Hudson, NY USA
来源：
SCRIPTA MATERIALIA | 1999年 / 40卷 / 10期
关键词：
D O I：
10.1016/S1359-6462(98)00411-4
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ultrafine (1μm) equiaxed ferrite grains in steel strip were produced using a simple new thermomechanical process. Strips were reheated to produce a coarse austenite grain size, then rolled in a single pass at or just above the Ar3. The ultrafine grains formed in the surface regions of the strip. Coarser ferrite grains (5-10μm) and carbides were produced in the core of the strip. Refinement of the grains was attributed to strain induced transformation from austenite to ferrite.
引用
收藏
页码：1179 / 1184
页数：6
相关论文
共 50 条
  • [11] Dynamic recrystallization of ferrite during warm deformation of ultrafine grained ultra-low carbon steel
    Murty, SVSN
    Torizuka, S
    Nagai, K
    Kitai, T
    Kogo, Y
    SCRIPTA MATERIALIA, 2005, 53 (06) : 763 - 768
  • [12] Gradient ultrafine ferrite and martensite structure and its tensile properties by asymmetric rolling in low carbon microalloyed steel
    Cai, M. H.
    Dhinwal, S. Singh
    Han, Q. H.
    Chao, Q.
    Hodgson, P. D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 583 : 205 - 209
  • [13] The formation of ultrafine ferrite through static transformation in low carbon steels
    Adachi, Y.
    Wakita, M.
    Beladi, H.
    Hodgson, P. D.
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2008, 22 (18-19): : 2804 - 2813
  • [14] The nanohardness of acicular ferrite and bainitic ferrite in low carbon microalloying steel
    Shang, C. J.
    Liang, X.
    Wang, X. M.
    He, X. L.
    Liu, H.
    PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3, 2007, 561-565 : 65 - 68
  • [15] The formation of ultrafine ferrite through static transformation in low carbon steels
    Adachi, Yoshitaka
    Wakita, Masayuki
    Beladi, Hossein
    Hodgson, Peter Damian
    ACTA MATERIALIA, 2007, 55 (14) : 4925 - 4934
  • [16] Ultrafine ferrite formation through cold-rolling and annealing of low-carbon dual-phase steel
    Okitsu, Y.
    Takata, N.
    Tsuji, N.
    MATERIALS SCIENCE AND TECHNOLOGY, 2015, 31 (06) : 745 - 754
  • [17] Research of Dynamic Recrystallization of Ferrite in a Low Carbon Steel
    Wang Meng
    Liu Yangbo
    Sun Qingsong
    Tong Qian
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MATERIALS, ENVIRONMENTAL AND BIOLOGICAL ENGINEERING, 2015, 10 : 1081 - 1085
  • [18] Ultrafining technology of ferrite grain for low carbon steel
    Yan, Su
    Liu, Jing-Hui
    Liu, Yun-Xu
    Jinshu Rechuli/Heat Treatment of Metals, 2005, 30 (10): : 13 - 16
  • [19] ACICULAR FERRITE IN WELD METAL OF LOW CARBON STEEL
    Prokic-Cvetkovic, Radica
    Milosavljevic, Andelka
    Popovic, Olivera
    Kovacevic, Katarina
    STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA, 2005, 5 (01): : 31 - 43
  • [20] Dynamic recrystallization of ferrite in a low-carbon steel
    Longfei L.
    Wangyue Y.
    Zuqing S.
    Metall Mat Trans A Phys Metall Mat Sci, 2006, 3 (609-619): : 609 - 619
12345